File:Log Power FFT, 913 x 278.png: Difference between revisions

From GNU Radio
Jump to navigation Jump to search
No edit summary
No edit summary
 
Line 1: Line 1:
== Summary ==


Flowgraph Components and Configuration.
This GNU Radio Companion flowgraph uses a Signal Source to generate a 1 kHz sine wave, processes it with a Log Power FFT block (FFT size 1024, reference scale 512, FFT Shift on) to compute a logarithmic power spectrum, and displays the result in a QT GUI Vector Sink, showing a peak at ±1,000 Hz at 0 dB.
 
Signal Source
Generates a sine wave.
Frequency: 1 kHz.
Sample Rate: 32,000 samples per second (32 kHz).
Amplitude: 1 (a simple, clean input signal).
 
 
Throttle Block
Matches the sample rate of the signal source at 32,000 sps.
Ensures data flows at the correct rate for real-time visualization.
 
Log Power FFT Block
Computes the logarithmic power spectrum of the input signal.
FFT Size: 1024 (number of frequency bins).
Reference Scale: 512 (sets the sine wave peak at 0 dB).
FFT Shift: Enabled (centers the spectrum, placing 0 Hz in the middle).
Frame Rate: 30 (updates the display 30 times per second).
Averaging: Disabled (shows instantaneous spectrum).
 
 
QT GUI Vector Sink
Visualizes the output spectrum.
X-Axis Start: -16,000 Hz (half the sample rate).
Step Value: 31.25 Hz (sample rate / FFT size).
Displays frequencies from -16,000 Hz to +16,000 Hz due to FFT Shift

Latest revision as of 20:10, 14 April 2025

This GNU Radio Companion flowgraph uses a Signal Source to generate a 1 kHz sine wave, processes it with a Log Power FFT block (FFT size 1024, reference scale 512, FFT Shift on) to compute a logarithmic power spectrum, and displays the result in a QT GUI Vector Sink, showing a peak at ±1,000 Hz at 0 dB.

File history

Click on a date/time to view the file as it appeared at that time.

Date/TimeThumbnailDimensionsUserComment
current17:01, 14 April 2025Thumbnail for version as of 17:01, 14 April 2025913 × 278 (54 KB)OnlyDPCanSaveMe (talk | contribs)This summary describes how to create a flowgraph in GNU Radio Companion (GRC) using the Log Power FFT block to process a sine wave signal and visualize its logarithmic power spectrum. The setup is straightforward, and the output aligns with the expected behavior of the block as described. Flowgraph Components and Configuration. Signal Source Generates a sine wave. Frequency: 1 kHz. Sample Rate: 32,000 samples per second (32 kHz). Amplitude: 1 (a simple, clean input signal). Throttle Block...

You cannot overwrite this file.

The following page uses this file:

Metadata

This file contains additional information, probably added from the digital camera or scanner used to create or digitize it.

If the file has been modified from its original state, some details may not fully reflect the modified file.

Retrieved from "https://wiki.gnuradio.org/index.php?title=File:Log_Power_FFT,_913_x_278.png&oldid=14928"