Threshold: Difference between revisions

From GNU Radio
Jump to navigation Jump to search
(Created page with "Category:Block Docs Category:Stub Docs This is the template for the "Page-per-block Docs". This first section should describe what the block...")
 
No edit summary
Line 1: Line 1:
[[Category:Block Docs]]
[[Category:Block Docs]]
[[Category:Stub Docs]]
Output a 1 or zero based on a threshold value.
This is the template for the [[:Category:Block_Docs|"Page-per-block Docs"]].  This first section should describe what the block does and how to use it, using however many paragraphs necessary.  Note that the title of the wiki page should match the block's name in GRC, i.e. the one defined in the block's .grc file.  Look at the [[FFT]] Block for a good example.


As this is a basic template, it's also in the [[:Category:Stub_Docs|"Stub Docs category"]]. Please improve it.
Test the incoming signal against a threshold. If the signal
excedes the High value, it will change its output to 1, and if the signal
falls below the Low value, it will change its output to 0.


== Parameters ==
== Parameters ==
(''R''): <span class="plainlinks">[https://wiki.gnuradio.org/index.php/GNURadioCompanion#Variable_Controls ''Run-time adjustable'']</span>
(''R''): <span class="plainlinks">[https://wiki.gnuradio.org/index.php/GNURadioCompanion#Variable_Controls ''Run-time adjustable'']</span>


; Param 1 (''R'')
; Low (''R'')
: Description of parameter, provide any tips or recommended values.  Note that the name of the parameter above should match the param's label that shows up in grc (e.g. Sample Rate).
: Low threshold. Outputs 0 if input goes below it


; Param 2
; High (''R'')
: blah blah blah
: Low threshold. Outputs 1 if input goes above it
 
; Initial value
: Value to output before the input reach one of the thresholds. Can be any value, not just 0 or 1.


== Example Flowgraph ==
== Example Flowgraph ==
Line 21: Line 25:


; C++ files
; C++ files
: [https://github.com/gnuradio/gnuradio TODO]
: [https://github.com/gnuradio/gnuradio/blob/master/gr-blocks/lib/threshold_ff_impl.cc Here]


; Header files
; Header files
: [https://github.com/gnuradio/gnuradio TODO]
: [https://github.com/gnuradio/gnuradio/blob/master/gr-blocks/lib/threshold_ff_impl.h Here]


; Public header files
; Public header files
: [https://github.com/gnuradio/gnuradio TODO]
: [https://github.com/gnuradio/gnuradio/blob/master/gr-blocks/include/gnuradio/blocks/threshold_ff.h Here]


; Block definition
; Block definition
: [https://github.com/gnuradio/gnuradio TODO]
: [https://github.com/gnuradio/gnuradio/blob/master/gr-blocks/grc/blocks_threshold_ff.block.yml Yaml]

Revision as of 15:42, 22 July 2019

Output a 1 or zero based on a threshold value.

Test the incoming signal against a threshold. If the signal excedes the High value, it will change its output to 1, and if the signal falls below the Low value, it will change its output to 0.

Parameters

(R): Run-time adjustable

Low (R)
Low threshold. Outputs 0 if input goes below it
High (R)
Low threshold. Outputs 1 if input goes above it
Initial value
Value to output before the input reach one of the thresholds. Can be any value, not just 0 or 1.

Example Flowgraph

Insert description of flowgraph here, then show a screenshot of the flowgraph and the output if there is an interesting GUI. Currently we have no standard method of uploading the actual flowgraph to the wiki or git repo, unfortunately. The plan is to have an example flowgraph showing how the block might be used, for every block, and the flowgraphs will live in the git repo.

Source Files

C++ files
Here
Header files
Here
Public header files
Here
Block definition
Yaml
Retrieved from "https://wiki.gnuradio.org/index.php?title=Threshold&oldid=5725"