Talk:Guided Tutorial GRC: Difference between revisions
No edit summary |
(→Update to GR 3.8?: new section) |
||
| (One intermediate revision by one other user not shown) | |||
| Line 1: | Line 1: | ||
I was able to get this tutorial (very informative btw) to work on Raspberry Pi 2 after the following steps: | I was able to get this tutorial (very informative btw) '''to work on Raspberry Pi 2''' after the following steps: | ||
Related previously installed programs: `sudo apt-get install rtl-sdr libtool libusb-1.0.0-dev librtlsdr-dev cmake` | Related previously installed programs: `sudo apt-get install rtl-sdr libtool libusb-1.0.0-dev librtlsdr-dev cmake` | ||
| Line 10: | Line 10: | ||
To add "RTL-SDR Source" block to GNURadio, `sudo apt-get install gr-osmosdr' | To add "RTL-SDR Source" block to GNURadio, `sudo apt-get install gr-osmosdr' | ||
== Update to GR 3.8? == | |||
Now that GR 3.8 is out, should these be updated? The referenced gr-tutorials repo will also have to be updated for 3.8. | |||
Do we want to preserve the 3.7 tutorials somehow? | |||
Latest revision as of 19:33, 5 September 2019
I was able to get this tutorial (very informative btw) to work on Raspberry Pi 2 after the following steps:
Related previously installed programs: `sudo apt-get install rtl-sdr libtool libusb-1.0.0-dev librtlsdr-dev cmake`
Other Installs: `sudo apt-get install libboost-dev sqlite pyqt4-dev-tools liblog4cpp5 libboost-all-dev libcppunit-dev`
Note: most of the above are required but some may not be. I just kept Googling around and installing until the `cmake` worked.
If all programs are installed without reboot, the command `ldconfig` may be necessary to configure linker bindings.
To add "RTL-SDR Source" block to GNURadio, `sudo apt-get install gr-osmosdr'
Update to GR 3.8?
Now that GR 3.8 is out, should these be updated? The referenced gr-tutorials repo will also have to be updated for 3.8. Do we want to preserve the 3.7 tutorials somehow?