GR-ATA Testbed: Difference between revisions
Jump to navigation
Jump to search
(Created page with " === Hardware === ==== USRP Receivers ==== There are two NI Ettus Research USRP software defined radio receivers installed in the testbed. <pre> USRP1: Serial Number: 31D3A...") |
|||
| Line 1: | Line 1: | ||
== Hardware == | |||
=== USRP Receivers === | |||
There are two NI Ettus Research USRP software defined radio receivers installed in the testbed. | There are two NI Ettus Research USRP software defined radio receivers installed in the testbed. | ||
| Line 19: | Line 19: | ||
sfp0: 10.11.1.23/24 | sfp0: 10.11.1.23/24 | ||
</pre> | </pre> | ||
=== CASPER SNAP Receivers === | |||
=== Xilinx Ultrascale+ FPGA Card === | |||
A Bittware CVP-13 card is installed in the `gnuradio1` server. It has a Xilinx Virtex UltraScale+ VU13P FPGA and 8 GB of DDR4 RAM. It is has a PCIe Gen3 x16 interface as well as four SFP28 interfaces capable of 100 GigE each. The RAM are two Crucial Ballistix BLS4G4D240FSB.8FBD sticks. | |||
* [https://www.bittware.com/wp-content/uploads/datasheets/ds-cvp13.pdf Datasheet] | |||
The USB JTAG interface is connected. | |||
=== Nvidia RTX 2080 Ti === | |||
=== Mellanox ConnectX-4 40 GigE NIC === | |||
=== NVME Fast Storage Buffer === | |||
=== RAID Data Storage === | |||
Revision as of 14:43, 12 December 2020
Hardware
USRP Receivers
There are two NI Ettus Research USRP software defined radio receivers installed in the testbed.
USRP1: Serial Number: 31D3A48 eth0: 10.1.50.20/24 sfp0: 10.11.1.20/24 sfp0: 10.11.1.21/24 USRP2: Serial Number: 31E008F eth0: 10.1.50.21/24 sfp0: 10.11.1.22/24 sfp0: 10.11.1.23/24
CASPER SNAP Receivers
Xilinx Ultrascale+ FPGA Card
A Bittware CVP-13 card is installed in the `gnuradio1` server. It has a Xilinx Virtex UltraScale+ VU13P FPGA and 8 GB of DDR4 RAM. It is has a PCIe Gen3 x16 interface as well as four SFP28 interfaces capable of 100 GigE each. The RAM are two Crucial Ballistix BLS4G4D240FSB.8FBD sticks.
The USB JTAG interface is connected.