ZMQ PULL Source: Difference between revisions

From GNU Radio
Jump to navigation Jump to search
(Created page with "Category:Block Docs Category:Stub Docs This is the template for the "Page-per-block Docs". This first section should describe what the block...")
 
 
(4 intermediate revisions by 3 users not shown)
Line 1: Line 1:
[[Category:Block Docs]]
[[Category:Block Docs]]
[[Category:Stub Docs]]
Receive messages on ZMQ PULL socket and source stream.
This is the template for the [[:Category:Block_Docs|"Page-per-block Docs"]].  This first section should describe what the block does and how to use it, using however many paragraphs necessary.  Note that the title of the wiki page should match the block's name in GRC, i.e. the one defined in the block's .grc file.  Look at the [[FFT]] Block for a good example.


As this is a basic template, it's also in the [[:Category:Stub_Docs|"Stub Docs category"]]. Please improve it.
This block will connect to a ZMQ PUSH socket, then produce all incoming messages as streaming output.


== Parameters ==
== Parameters ==
(''R''): <span class="plainlinks">[https://wiki.gnuradio.org/index.php/GNURadioCompanion#Variable_Controls ''Run-time adjustable'']</span>
(''R''): <span class="plainlinks">[https://wiki.gnuradio.org/index.php/GNURadioCompanion#Variable_Controls ''Run-time adjustable'']</span>


; Param 1 (''R'')
; Address
: Description of parameter, provide any tips or recommended values. Note that the name of the parameter above should match the param's label that shows up in grc (e.g. Sample Rate).
: ZMQ socket address specifier. The format of the address is <code>tcp://*:port</code> where * should be 127.0.0.1 for localhost.<br>
: <b>Note:</b> If the Source and Sink blocks are on two different computers on the same LAN, then the IP and port number of the Sink block must be specified on each end of that connection. For example, if the Sink is on IP 192.168.2.14:5678 and the Source is on IP 192.168.2.5, both Source and Sink blocks must specify the Sink IP and port (192.168.2.14:5678).


; Param 2
; Timeout
: blah blah blah
: Receive timeout in milliseconds, default is 100ms.
; Pass Tags
: Whether sink will serialize and pass tags over the link.
; High Watermark
: High Watermark is the hard limit on the maximum number of outstanding messages that ZMQ will queue in the memory. The default value is set to -1. If there is to be no limit on the number of messages, set this value to zero.
: <b>Note:</b> ZMQ does not guarantee that the socket will be able to queue as many messages as specified, and the actual limit may be lower or higher, depending on socket transport.


== Example Flowgraph ==
== Example Flowgraph ==
Line 21: Line 26:


; C++ files
; C++ files
: [https://github.com/gnuradio/gnuradio TODO]
: [https://github.com/gnuradio/gnuradio/blob/main/gr-zeromq/lib/pull_source_impl.cc pull_source_impl.cc]


; Header files
; Header files
: [https://github.com/gnuradio/gnuradio TODO]
: [https://github.com/gnuradio/gnuradio/blob/main/gr-zeromq/lib/pull_source_impl.h pull_source_impl.h]


; Public header files
; Public header files
: [https://github.com/gnuradio/gnuradio TODO]
: [https://github.com/gnuradio/gnuradio/blob/main/gr-zeromq/include/gnuradio/zeromq/pull_source.h pull_source.h]


; Block definition
; Block definition
: [https://github.com/gnuradio/gnuradio TODO]
: [https://github.com/gnuradio/gnuradio/blob/main/gr-zeromq/grc/zeromq_pull_source.block.yml zeromq_pull_source.block.yml]

Latest revision as of 11:11, 3 February 2023

Receive messages on ZMQ PULL socket and source stream.

This block will connect to a ZMQ PUSH socket, then produce all incoming messages as streaming output.

Parameters

(R): Run-time adjustable

Address
ZMQ socket address specifier. The format of the address is tcp://*:port where * should be 127.0.0.1 for localhost.
Note: If the Source and Sink blocks are on two different computers on the same LAN, then the IP and port number of the Sink block must be specified on each end of that connection. For example, if the Sink is on IP 192.168.2.14:5678 and the Source is on IP 192.168.2.5, both Source and Sink blocks must specify the Sink IP and port (192.168.2.14:5678).
Timeout
Receive timeout in milliseconds, default is 100ms.
Pass Tags
Whether sink will serialize and pass tags over the link.
High Watermark
High Watermark is the hard limit on the maximum number of outstanding messages that ZMQ will queue in the memory. The default value is set to -1. If there is to be no limit on the number of messages, set this value to zero.
Note: ZMQ does not guarantee that the socket will be able to queue as many messages as specified, and the actual limit may be lower or higher, depending on socket transport.

Example Flowgraph

Insert description of flowgraph here, then show a screenshot of the flowgraph and the output if there is an interesting GUI. Currently we have no standard method of uploading the actual flowgraph to the wiki or git repo, unfortunately. The plan is to have an example flowgraph showing how the block might be used, for every block, and the flowgraphs will live in the git repo.

Source Files

C++ files
pull_source_impl.cc
Header files
pull_source_impl.h
Public header files
pull_source.h
Block definition
zeromq_pull_source.block.yml
Retrieved from "https://wiki.gnuradio.org/index.php?title=ZMQ_PULL_Source&oldid=12932"