Correlation Estimator

Correlates the input signal against the provided vector of samples and outputs a phase and symbol timing estimate.

It adds the tags of "corr_start", "phase_est", "time_est", "corr_est", and "amp_est".

This block is designed to search for a sync word by correlation and uses the results of the correlation to get a time and phase offset estimate. These estimates are passed downstream as stream tags for use by follow-on synchronization blocks.

The sync word is provided as a set of symbols after being filtered by a baseband matched filter.

The phase_est tag can be used by downstream blocks to adjust their phase estimator/correction loops, and is currently implemented by the Costas Loop block.

The time_est tag can be used to adjust the sampling timing estimate of any downstream synchronization blocks and is currently implemented by the Polyphase Clock Sync block.

The caller must provide a "time_est" and "phase_est" tag marking delay from the start of the correlated signal segment, in order to mark the proper point in the sync word for downstream synchronization blocks. Generally this block cannot know where the actual sync word symbols are located relative to "corr_start", given that some modulations have pulses with intentional ISI. The user should manually examine the primary output and the "corr_start" tag position to determine the required tag delay settings for the particular modulation, sync word, and downstream blocks used.

For a discussion of the properties of complex correlations, with respect to signal processing, see: Marple, Jr., S. L., "Estimating Group Delay and Phase Delay via Discrete-Time 'Analytic' Cross-Correlation, _IEEE_Transactions_on_Signal_Processing_, Volume 47, No. 9, September 1999

Tag output

'phase_est': Estimate of phase offset

'time_est': Estimate of symbol timing offset

'corr_est': Correlation value of the estimates

'amp_est': 1 over the estimated amplitude. Estimated amplitude being the maximum amplitude of any one sample in the time window processed by the block (that at least includes the entire sync word)

'corr_start': the start sample of the correlation and its value (same value as 'corr_est')

Parameters

(R): Run-time adjustable

Symbols

Set of symbols to correlate against (e.g., a sync word).

Samples per Symbol

Samples per symbol

Tag Marking Delay (R)

Tag marking delay in samples after the corr_start tag

Threshold (R)

Threshold of correlator: The meaning of this parameter depends on the threshold method used. For DYNAMIC threshold method, this parameter is actually 1 - Probability of False Alarm (under some inaccurate assumptions). The code performs the check |r[k]|^2 + |r[k+1]|^2 <> -log(1-threshold)*2*E, where r[k] is the correlated incoming signal, and E is the average sample energy of the correlated signal. For ABSOLUTE threshold method, this parameter sets the threshold to a fraction of the maximum squared autocorrelation. The code performs the check |r[k]|^2 <> threshold * R^2, where R is the precomputed max autocorrelation of the given sync word. Default is 0.9.

Threshold Method

Method for computing threshold. Options: [Absolute, Dynamic]

Example Flowgraph

This flowgraph is extracted from [1]

Example Output

Source Files

C++ files

corr_est_cc_impl.cc

Header files

corr_est_cc_impl.h

Public header files

corr_est_cc.h

Block definition

digital_corr_est_cc.block.yml