RTL-SDR FM Receiver

From GNU Radio
Revision as of 15:49, 18 May 2024 by Wavewalkerdsp (talk | contribs) (Created page with "RTL-SDR Based FM Receiver This tutorial describes how to receive broadcast commercial radio stations transmitting Frequency Modulated (FM) signals using the RTL-SDR receiver. The following hardware is needed for this tutorial: * RTL-SDR Receiver * VHF Antenna Please connect the antenna to the RTL-SDR, and plug the RTL-SDR into the USB port on your computer. ==Configuring the RTL-SDR Properties== Add the Soapy RTLSDR Source block to the flowgraph. Soapy [https://gith...")
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to navigation Jump to search

RTL-SDR Based FM Receiver

This tutorial describes how to receive broadcast commercial radio stations transmitting Frequency Modulated (FM) signals using the RTL-SDR receiver. The following hardware is needed for this tutorial:

  • RTL-SDR Receiver
  • VHF Antenna

Please connect the antenna to the RTL-SDR, and plug the RTL-SDR into the USB port on your computer.


Configuring the RTL-SDR Properties

Add the Soapy RTLSDR Source block to the flowgraph. Soapy [1] is a SDR support library which interfaces with different SDR hardware.

Retrieved from "https://wiki.gnuradio.org/index.php?title=RTL-SDR_FM_Receiver&oldid=14272"