Burst Tagger

From GNU Radio
Revision as of 03:55, 21 July 2019 by 777arc (talk | contribs)
Jump to navigation Jump to search

Sets a burst on/off tag based on the value of the trigger input. This block takes two inputs, a signal stream on the input stream 0 and a trigger stream of shorts on input stream 1. If the trigger stream goes above 0, a tag with the key "burst" will be transmitted as a pmt::PMT_T. When the trigger signal falls below 0, the "burst" tag will be transmitted as pmt::PMT_F. The signal on stream 0 is retransmitted to output stream 0.

Parameters

(R): Run-time adjustable

True KeyID (R)
Change the key from "burst" to a custom string, for the True tag.
True Value (R)
Whether the tag's value should be True or False
False KeyID (R)
Change the key from "burst" to a custom string, for the False tag.
False Value (R)
Whether the tag's value should be True or False

Example Flowgraph

Insert description of flowgraph here, then show a screenshot of the flowgraph and the output if there is an interesting GUI. Currently we have no standard method of uploading the actual flowgraph to the wiki or git repo, unfortunately. The plan is to have an example flowgraph showing how the block might be used, for every block, and the flowgraphs will live in the git repo.

Source Files

C++ files
[1]
Header files
[2]
Public header files
[3]
Block definition
[4]