UDP Sink
Jump to navigation
Jump to search
Write stream to an UDP socket. Can be used with UDP Source from another flowgraph or just an external application.
Parameters
- IP Address
- The name or IP address of the transmitting host; can be NULL, None, or "0.0.0.0" to allow reading from any interface on the host
- Port
- The port number on which to receive data; use 0 to have the system assign an unused port number
- Payload Size
- UDP payload size by default set to 1472 = (1500 MTU - (8 byte UDP header) - (20 byte IP header))
- Null Packet is EOF
- Interpret zero-length packet as EOF (default: true)
Example Flowgraph
This flowgraph can be found at [1]
Source Files
- C++ files
- 1
- Header files
- 2
- Public header files
- 3
- Block definition
- 3