Difference between revisions of "Audio Sink"

From GNU Radio
Jump to: navigation, search
(revised Parameters section)
(Tweak formatting and fixup OSX section)
Line 1: Line 1:
 
[[Category:Block Docs]]
 
[[Category:Block Docs]]
 +
 
Allows a signal to be played through your speakers or other audio device
 
Allows a signal to be played through your speakers or other audio device
  
Line 5: Line 6:
  
 
=== Sample Rate ===
 
=== Sample Rate ===
 +
 
To set the Audio sampling rate, click the drop-down menu to see popular rates.  Note: not all sampling rates will be supported by your hardware. For typical applications, this should be set to 48kHz.  
 
To set the Audio sampling rate, click the drop-down menu to see popular rates.  Note: not all sampling rates will be supported by your hardware. For typical applications, this should be set to 48kHz.  
  
 
=== Device Name ===
 
=== Device Name ===
Leave the device name blank to choose the default audio device. Other typical choices include:
+
 
 +
Leave the device name blank to choose the default audio device. Selecting a specific device name depends on the OS.
 +
 
 +
==== OSX ====
 +
 
 +
On OSX, go into the System Preferences, click on "Sound", and then the "Output" tab. The listings under "Name" contain the exact device names currently available; if a new audio sink is attached to the computer then a new name will appear -- for example "Headphones" for some Macs. Since most such device names contain spaces, make sure to put quotes around the name argument, for example:
 +
 
 +
    spectrum_inversion.py -O "MacBook Pro Speakers"
 +
 
 +
==== Linux ====
 +
 
 +
On Linux, typical choices include:
 
* pulse
 
* pulse
 
* hw:0,0
 
* hw:0,0
 
* plughw:0,0
 
* plughw:0,0
 +
 
For ALSA users with audio trouble, follow this procedure:
 
For ALSA users with audio trouble, follow this procedure:
 
* from a terminal window enter:
 
* from a terminal window enter:
Line 27: Line 41:
  
 
=== OK to Block ===
 
=== OK to Block ===
 +
 
On by default, which should be used when this sink is not throttled by any other block.
 
On by default, which should be used when this sink is not throttled by any other block.
  

Revision as of 13:46, 1 May 2020


Allows a signal to be played through your speakers or other audio device

Parameters

Sample Rate

To set the Audio sampling rate, click the drop-down menu to see popular rates. Note: not all sampling rates will be supported by your hardware. For typical applications, this should be set to 48kHz.

Device Name

Leave the device name blank to choose the default audio device. Selecting a specific device name depends on the OS.

OSX

On OSX, go into the System Preferences, click on "Sound", and then the "Output" tab. The listings under "Name" contain the exact device names currently available; if a new audio sink is attached to the computer then a new name will appear -- for example "Headphones" for some Macs. Since most such device names contain spaces, make sure to put quotes around the name argument, for example:

   spectrum_inversion.py -O "MacBook Pro Speakers"

Linux

On Linux, typical choices include:

  • pulse
  • hw:0,0
  • plughw:0,0

For ALSA users with audio trouble, follow this procedure:

  • from a terminal window enter:

aplay -L

  • find the entry such as:
   hw:CARD=Device,DEV=0
       USB Audio Device, USB Audio
       Direct hardware device without any conversions

      from the list which matches your device.

  • use the first line of that entry (e.g. "hw:CARD=Device,DEV=0") as the device name (without the quotes).

OK to Block

On by default, which should be used when this sink is not throttled by any other block.

Num Inputs

The audio sink can have multiple inputs depending upon your hardware. For example, set the inputs to 2 for stereo or 1 for mono.

Example Flowgraph

This flowgraph should play a 1 kHz tone out of your speakers. Note that you don't need a throttle block, the Audio Sink should throttle for you. If you do end up using an already-throttled signal source, then set "OK to Block" to No.

Audio-sink-ex.png