Audio Source

From GNU Radio
Revision as of 00:05, 29 October 2019 by Duggabe (talk | contribs) (revise details, give an example)
Jump to navigation Jump to search

Acts as a microphone input. See Audio Sink for a block that outputs to a speaker.

Not all sampling rates will be supported by your hardware. The audio source can have multiple outputs depending upon your hardware. For example, set the outputs to 2 for stereo audio.

Parameters

Sample Rate

To set the Audio sampling rate, click the drop-down menu to see popular rates. Note: not all sampling rates will be supported by your hardware. For typical applications, this should be set to 48kHz.

Device Name

Leave the device name blank to choose the default audio device. Other typical choices include:

  • pulse
  • hw:0,0
  • plughw:0,0
  • /dev/dsp

For ALSA users with audio trouble, follow this procedure:

  • from a terminal window enter:

arecord -L

  • find the entry such as:
   hw:CARD=Device,DEV=0
       USB Audio Device, USB Audio
       Direct hardware device without any conversions

      from the list which matches your device.

  • use the first line of that entry (e.g. "hw:CARD=Device,DEV=0") as the device name (without the quotes).

OK to Block

On by default, which should be used when this sink is not throttled by any other block.

Example Flowgraph

This flowgraph shows the Audio Source block feeding a radioteletype (RTTY) decoder.

RTTY rcv.png