Burst Tagger

From GNU Radio
Revision as of 22:07, 9 September 2021 by 172.18.0.3 (talk) ("To or below" instead of just "to")
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to: navigation, search

Sets a burst on/off tag based on the value of the trigger input. This block takes two inputs, a signal stream on the input stream 0 and a trigger stream of shorts on input stream 1. If the trigger stream goes above 0, a tag with the key "burst" will be transmitted as a pmt::PMT_T. When the trigger signal falls to (or below) 0, the "burst" tag will be transmitted as pmt::PMT_F. The signal on stream 0 is retransmitted to output stream 0.

Parameters[edit]

(R): Run-time adjustable

True KeyID (R)
Change the key from "burst" to a custom string, for the True tag.
True Value (R)
Whether the tag's value should be True or False
False KeyID (R)
Change the key from "burst" to a custom string, for the False tag.
False Value (R)
Whether the tag's value should be True or False

Example Flowgraph[edit]

Burst tag test fg.png

Example Output[edit]

Burst tag test out.png

Source Files[edit]

C++ files
[1]
Header files
[2]
Public header files
[3]
Block definition
[4]