Decimating FIR Filter: Difference between revisions

From GNU Radio
Jump to navigation Jump to search
(add Example Flowgraph)
(Undo revision 7788 by 172.18.0.7 (talk))
(One intermediate revision by one other user not shown)
(No difference)

Revision as of 14:22, 29 November 2020

This is GNU Radio's "normal" FIR Filter.

For a large number of taps, consider using an FFT Filter, see [1]

For standard filters such as lowpass, highpass, bandpass, etc., the filter.firdes and filter.optfir classes provide convenient generating methods.

Parameters

(R): Run-time adjustable

Decimation
Decimation rate. The output stream will have this decimation applied to it. A decimation rate of 1 simply means no decimation. If decimation is set higher than 1, make sure the filter will remove energy outside of the "output region", i.e. -Fs/2 to Fs/2 where Fs is the input sample rate divided by the decimation rate.
Taps (R)
Taps to use in FIR filter.
Sample Delay
Additional samples to delay by, default is 0 or no delay.

Example Flowgraph

This flowgraph implements a Broadcast FM stereo receiver using basic blocks.

USRP FM stereo fg.png

Source Files

C++ files
TODO
Header files
TODO
Public header files
TODO
Block definition
GRC File