Decimating FIR Filter

From GNU Radio
Jump to navigation Jump to search
The printable version is no longer supported and may have rendering errors. Please update your browser bookmarks and please use the default browser print function instead.

This is GNU Radio's "normal" FIR Filter.

For a large number of taps, consider using an FFT Filter, see [1]

For standard filters such as lowpass, highpass, bandpass, etc., the filter.firdes and filter.optfir classes provide convenient generating methods.

Parameters

(R): Run-time adjustable

Decimation
Decimation rate. The output stream will have this decimation applied to it. A decimation rate of 1 simply means no decimation. If decimation is set higher than 1, make sure the filter will remove energy outside of the "output region", i.e. -Fs/2 to Fs/2 where Fs is the input sample rate divided by the decimation rate.
Taps (R)
Taps to use in FIR filter.
Sample Delay
Additional samples to delay by, default is 0 or no delay.

Example Flowgraph

This flowgraph implements a Broadcast FM stereo receiver using basic blocks.

USRP FM stereo fg.png

Source Files

C++ files
fir_filter.cc
Public header files
fir_filter.h
Block definition
filter_fir_filter_xxx.block.yml