Development

From GNU Radio
Revision as of 18:57, 7 April 2020 by Duggabe (talk | contribs) (reorganize and clarify "I found a bug")
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to: navigation, search

Contributing to GNU Radio -- FAQ[edit]

GNU Radio is an Open Source project, and as such contributions from the community are welcome. If you have some code or other things such as documentation you would like to share with the rest, please have a look at this FAQ before submitting.

Cheat Sheet[edit]

See the information throughout this page for details about these steps. But when looking to contribute, we encourage you to either make a new issue in the Issue Tracker or identify a current Issue already up and waiting for attention. We also assume you have a public GitHub repo you can use for pull requests and that you have forked the GNU Radio git repo.

  • Identify which branch of the GNU Radio base code to work from. Most of the time, that's master.
  • Create a new branch from here to work from.
  • Work on the bug fix or feature under the new branch.
  • Determine the QA code necessary to test and check the fix or feature.
  • Provide (an) appropriate Git commit(s) with well-formatted log messages.
  • Push the branch to a public repo on Github.
  • Issue a pull request against the base branch (i.e., master).
  • If you're in the gr-dev group, please update the labels. If you are planning on doing more GNU Radio development, please request access to that group.
  • Update the Issue on gnuradio/issues with information about the fix, including a link to the pull request on Github.
  • Adding fixes #issue_number or closes #issue_number to the bottom of the appropriate commit message leverages GitHub's automatic issue closing.
  • Wait for the pull request to be merged -- often after some back and forth and testing by other developers.
  • Mark the Issue resolved and note the commit where it was resolved.

The GNU Radio project maintainers will mark issues as Closed at the appropriate time.

How can I help?[edit]

The easiest way to help is to simply use GNU Radio. The more you use it, the more likely you will perhaps find a bug, or miss a particular feature. Tell us about it on the mailing list, or, even better, fix it yourself and submit the code. The most rewarding way to go is probably to actually write a radio system, e.g. a receiver for a digital standard.

If you want to get involved in the development process, here's some suggestions where to start:

  • Documentation
  • Missing test cases
  • Report and reproduce bugs
  • Bug fixes
  • Review pull requests
  • Implement new features

The main place to look is the issue tracker: https://github.com/gnuradio/gnuradio/issues. It tracks warnings, TODO's, FIXME's, and unit tests. Any warnings or FIXME fixes are useful as well as any more unit tests to exercise the validity of the signal processing or runtime code. Issues suitable for beginners are tagged "good first issue".

We also use Coverity for static code analysis. You can find our project at [1]. Here, you can find small things to change and fix (a lot of these are so small you don't even need an FSF copyright assignment).

There's also the possibility to donate to our project. The Free Software Foundation provides the infrastructure to do so, and can provide a receipt for US tax payers, who can deduct a donation.

Development Style[edit]

Our coding and development style is codified on GREP1.

Quality Assurance (QA) Code[edit]

Every block should have a QA file to test the validity of the code. Most current blocks have QA code that tests that the code runs and produces repeatable, testable results on all platforms. If this code fails, it is an indication of a problem, error, or unexpected change in the code. It is an easy way to verify the validity of the code. This can be a difficult concept in some signal processing codes (such as a phase lock loop that has to settle), but the current QA tests that are there can offer guidance and hints as to how to test a new block.

Any block that is currently without a QA testing program should be fixed to have one.

I've found a bug, but I don't have the skill/time/whatever to fix it... now what?[edit]

No problem. If it's really an unfixed bug, you're perhaps the first to stumble upon it. Write an email to the discuss-gnuradio@gnu.org mailing list explaining what's wrong and, ideally, providing a test case so the developers can reproduce the error.

If it's a confirmed bug, you should add a ticket to the GNU Radio issue tracker by following these steps:

1. If you don't already have one, create an account on GitHub.
2. You'll need to login to GitHub, first, and then click New Issue.
3. Provide an appropriate subject to explain the Issue (shorter than 72 characters).
4. Provide a comprehensive description of the Issue. Provide links, code, and any examples here. It's much easier for us to understand a bug if we have a simple test case that demonstrates the issue such as a GRC file or Python program. Feel free to upload attachments using the Files button.

I've fixed an Issue! What do I do now?[edit]

That's fantastic! Thanks! To help us provide a consistent experience resolving and fixing issues, please follow these steps.

1. Fork the GNU Radio project repository to your personal GitHub development space.
2. Create a new git branch based on master or next and add commits which fix the issue you found.
3. Push the new feature branch to your personal fork of the GNU Radio project repository.
4. Create a new pull request on GitHub by visiting the GNU Radio pull request page and clicking New pull request, then select the appropriate base branch in the GNU Radio project (master or next) and select your feature branch to compare with from your personal fork .

The GNU Radio development team will take the issue from here. We will handle merging the fix and updating the issue from there. We will need your help to resolve conflicts and issues regarding your code. Communication will happen solely in the GitHub pull request comments to keep conversation and code close together.

Assignment[edit]

Assignment to an Issue means that an individual has taken on the task of handling that particular issue of either fixing a bug or adding a feature. When assigned, that issue is claimed by the assignee, and so we expect that person to handle the task. Assigned issues that are not kept up on will be either removed or the assignee will be taken off. Removing the issue will generally occur with a feature request where that feature is not being managed properly. If it is a bug, inaction on it means that others may be discouraged from working on this because it is already assigned.

How can I add new features to GNU Radio?[edit]

First of all, you should ask yourself if your code really belongs into the GNU Radio core. If you are developing a GNU Radio module which can exist completely separate of the GNU Radio code, it might be worth uploading it to CGRAN, where you can maintain the code yourself and don't have to go through the process of re-submitting patches.

If you're having any trouble with this, don't hesitate to ask on the mailing list.

Which kind of patches are accepted into GNU Radio?[edit]

There is no definitive answer to this. Bug fixes and missing QA codes are of course always welcome.

Ultimately, the decision lies with the maintainers. If in doubt, consult the mailing list.

How long does it take for my patch to become part of GNU Radio?[edit]

Again, there is no definitive answer to this. It depends on many things: the complexity and size of the patch, the current situation of development and the relevance of the patch.

However, the following things are guaranteed to delay acceptance:

What's this CGRAN?[edit]

The Comprehensive GNU Radio Archive Network (CGRAN) is a free open source repository for 3rd party GNU Radio applications that are not officially supported by the GNU Radio project. In other words, it is a place for anybody to upload and publish extensions and modifications of and for GNU Radio.

If you are developing a GNU Radio project which works separately from the GNU Radio core, you might want to submit it to CGRAN rather than to the GNU Radio core. This way, you keep the write access to your published code and can maintain it independently from the core.

Which coding conventions apply?[edit]

See Coding guidelines.

How is the code documented?[edit]

GNU Radio uses Doxygen to document the source code. Any new block should use Doxygen markup structure to add to the Doxygen manual. Also, we use a list of groups to categorize all of the blocks, so when a new block is created, add this block to one or more of the available groups, a list of which can be found in docs/doxygen/other/group_defs.dox. Below is an example of a marked-up header file.

/*!
 * \brief A new block that does something.
 * \ingroup some_group
 * \ingroup another_group
 *
 * Detailed description of what this block does.
 * Quoting papers or textbooks is a good idea, too.
 */
class MODNAME_API new_block : public gr::block
{
 private:
  new_block(int param1, double param2);

 public:
  typedef boost::shared_ptr sptr;

  /*!
   * \brief Description of public_function()
   * \param foo Describe foo
   * \param bar Describe bar
   */
  virtual int public_function(int foo, float bar) = 0;

  /*!
   * \param param1 Describe param1
   * \param param2 Describe param2
   */
  static sptr make(int param1, double param2);

};

The top level blocks are all described inside that blocks doc directory in a .dox files named or the component. For example, in the component gr-digital, the manual page describing this component is in gr-digital/doc/digital.dox. This page should provide any detail that can help users add and use these packages and their blocks. As these components are developed, used, and added to, any more details that can go into this Doxygen page should be added for the benefit of anyone else.

The component's doc directory will also contain a README.package that gives a brief description of the package. This file should contain the most basic necessary information and point to the Doxygen files for more detail.

Doxygen Markup for Formulas[edit]

When inserting formulas into the header to be part of the documentation, we want to have the best representation possible, which means making Latex style formulas. This is done in Doxygen using the "\f{" to begin and "\f}" to end the formula section. However, these do not properly show up in the XML documents used in the Python help files. So we have to make the formula twice, once formatted for the HTML manual and another for the XML. It will look like this:

This is some text in the header...
\f{html}{
enter Latex formula here -> will only show up in the HTML document.
}

\xmlonly
Same Latex formula, but this will not be processed; will only be the raw Latex formula.
\endxmlonly

And here's some following text to the formulas.

Note that the spacing between sections is important to get the best output format. Furthermore, there are certain Doxygen markups that will cause a problem in the XML representation, like use the of \frac in Latex to create a fraction will not parse properly. There is likely a better way to handle this (PLEASE UPDATE IF YOU KNOW IT), but for now, we just add a space between them as "\ f".

What's this Copyright Assignment?[edit]

Before we can accept non-trivial code contributions from you, we need a copyright assignment on file with the FSF. A description of the process is available here. Basically, this guarantees the FSF (who is copyright holder of GNU Radio) does not run into any legal trouble somewhere down the road.

This boils down to the following instructions:

  • If you've developed some addition or patch to GNU Radio that you would like to contribute, you should send an email to the mailing list, or to one of the GNU Radio maintainers asking for an appropriate form. We might ask you for some more information at this point.
  • You will be sent a short form by email which you should fill in and email back to the FSF.
  • Once the FSF have received this email, they will send you a paper copy of the full copyright assignment papers for you to sign and post back to them.
  • As soon as the signed paperwork is filed at the FSF we can accept your changes into the source tree.
  • Individual small changes (fewer than 10 lines of code) can, however, be accepted without a copyright assignment form on file.

In order to get the process rolling, please email "bhilburn AT gnuradio.org" for a form to start the copyright process.

Who maintains GNU Radio?[edit]

See gnuradio organization.