GR-ATA Testbed: Difference between revisions

From GNU Radio
Jump to navigation Jump to search
(Update USRP IP addresses for XG image)
 
(One intermediate revision by the same user not shown)
Line 11: Line 11:
eth0: 10.1.50.20/24
eth0: 10.1.50.20/24
sfp0: 10.11.1.20/24
sfp0: 10.11.1.20/24
sfp0: 10.11.1.21/24
sfp1: 10.11.1.21/24


USRP2:
USRP2:
Line 17: Line 17:
eth0: 10.1.50.21/24
eth0: 10.1.50.21/24
sfp0: 10.11.1.22/24
sfp0: 10.11.1.22/24
sfp0: 10.11.1.23/24
sfp1: 10.11.1.23/24
</pre>
</pre>



Latest revision as of 08:20, 21 December 2023

Hardware

USRP Receivers

There are two NI Ettus Research USRP software defined radio receivers installed in the testbed.

USRP1:
Serial Number: 31D3A48
eth0: 10.1.50.20/24
sfp0: 10.11.1.20/24
sfp1: 10.11.1.21/24

USRP2:
Serial Number: 31E008F
eth0: 10.1.50.21/24
sfp0: 10.11.1.22/24
sfp1: 10.11.1.23/24

CASPER SNAP Receivers

Xilinx Ultrascale+ FPGA Card

A Bittware CVP-13 card is installed in the `gnuradio1` server. It has a Xilinx Virtex UltraScale+ VU13P FPGA and 8 GB of DDR4 RAM. It is has a PCIe Gen3 x16 interface as well as four SFP28 interfaces capable of 100 GigE each. The RAM are two Crucial Ballistix BLS4G4D240FSB.8FBD sticks.

The USB JTAG interface is connected.

Nvidia RTX 2080 Ti

Mellanox ConnectX-4 40 GigE NIC

NVME Fast Storage Buffer

RAID Data Storage