GR-ATA Testbed

From GNU Radio
Revision as of 14:43, 12 December 2020 by Dkozel (talk | contribs) (Hardware)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to: navigation, search

Hardware[edit]

USRP Receivers[edit]

There are two NI Ettus Research USRP software defined radio receivers installed in the testbed.

USRP1:
Serial Number: 31D3A48
eth0: 10.1.50.20/24
sfp0: 10.11.1.20/24
sfp0: 10.11.1.21/24

USRP2:
Serial Number: 31E008F
eth0: 10.1.50.21/24
sfp0: 10.11.1.22/24
sfp0: 10.11.1.23/24

CASPER SNAP Receivers[edit]

Xilinx Ultrascale+ FPGA Card[edit]

A Bittware CVP-13 card is installed in the `gnuradio1` server. It has a Xilinx Virtex UltraScale+ VU13P FPGA and 8 GB of DDR4 RAM. It is has a PCIe Gen3 x16 interface as well as four SFP28 interfaces capable of 100 GigE each. The RAM are two Crucial Ballistix BLS4G4D240FSB.8FBD sticks.

The USB JTAG interface is connected.

Nvidia RTX 2080 Ti[edit]

Mellanox ConnectX-4 40 GigE NIC[edit]

NVME Fast Storage Buffer[edit]

RAID Data Storage[edit]