GR-ATA Tutorial: Difference between revisions

From GNU Radio
Jump to navigation Jump to search
(Created page with "On this page we'll walk through important steps for running an observation on the Allen Telescope Array with GNU Radio and the gr-ata module. __TOC__ == Observing with the...")
 
No edit summary
Line 1: Line 1:
On this page we'll walk through important steps for running an observation on the Allen Telescope Array with GNU Radio and the gr-ata module.  
On this page we'll walk through a few scenarios of running observations (both real and simulated) on the Allen Telescope Array with GNU Radio and the gr-ata module.  


__TOC__  
__TOC__  


== Observing with the Allen Array ==
== Step 0: Before you start... ==


In order to run an observation on the ATA, please know that you must coordinate with ATA staff to avoid interfering with science observing campaigns onsite.  
In order to run an observation on the ATA, please know that you '''must coordinate with ATA staff''' to avoid interfering with science observing campaigns onsite.  


Please find a catalog of astronomical sources recognized by the gr-ata module here: https://github.com/SETIatHCRO/gr-ata/blob/master/docs/ata-catalog.txt
Please find a catalog of astronomical sources recognized by the gr-ata module here: https://github.com/SETIatHCRO/gr-ata/blob/master/docs/ata-catalog.txt
 
Before beginning this tutorial, please make sure that you have installed GNU Radio version 3.8, gr-ata, and the ATA-Utils library, following the instructions here: [https://wiki.gnuradio.org/index.php/GNURadio@theATA#Setting_up_the_software Setting up the software]
 
== Tutorial 1: A Simulated ATA Observation ==
 
In this first tutorial, we will run through a simulated offline "observing" session -- although in this tutorial we won't be conducting real observations, it is a good idea to start here to make sure you understand what the gr-ata blocks are doing and get familiar with the system and terminology before starting your real observation. This mode of running the gr-ata blocks does not require you to be able to connect to the ATA computers, either, so it is a good place to start.
 
Let's first try a very simple test. Drag and drop an ATA Track Scan block and an ATA Control block into an empty flowgraph and connect their message ports as shown below.
 
'''image here'''
 
Make sure you have changed the ID field in the automatically-populated Options block to something besides '''default''' or the program won't run. Now double click the Control block to bring up the '''Properties''' window. Enter your username (for the offline tutorial this field doesn't matter, just type anything), then select '''Offline Mode''' from the '''Mode''' drop-down list, as shown. Click '''OK''' to apply your changes and close the Properties window.
 
'''image here'''
 
Now double click on the Track Scan block to view its properties. The first field is '''Frequency (MHz)''' -- enter any number of your choice here (it doesn't really matter what you enter in Offline Mode, just so long as it is a number). The next field is '''List of antennas'''; this field requires a string or list of strings as input, entered as shown. To simulate a real observing session, you could enter one or more of the actual antenna names of ATA antennas by choosing from the following list: '''1a, 1b, 1c, 1d, 1e, 1f, 1g, 1h, 1j, 1k, 2a, 2b, 2c, 2d, 2e, 2f, 2g, 2h, 2j, 2k, 2l, 2m, 3c, 3d, 3e, 3f, 3g, 3h, 3j, 3l, 4e, 4f, 4g, 4h, 4j, 4k, 4l, 5b, 5c, 5e, 5g, 5h''' as shown. Next, select how you want to enter your target source in the '''Coordinate Type''' drop-down -- you can choose '''Catalog Identifier''' (as in the example below), '''RA / Dec''', or '''Az / El'''. If you choose Catalog Identifier, a '''Source ID''' field will be displayed, where you can enter a source name -- in '''Offline Mode''' this source name can be anything, but in '''Observing Mode''' you must select an identifier from this [https://github.com/SETIatHCRO/gr-ata/blob/master/docs/ata-catalog.txt catalog]. If you select '''RA / Dec''', separate '''RA''' and '''Dec''' fields will be displayed where you can enter your coordinates in decimal degrees; similarly if you select '''Az / El''', '''Az''' and '''El''' fields will be displayed as well.
 
'''image here'''
 
Now that you have connected the two blocks and filled out the required fields, you can save your flowgraph then hit '''Run'''. You should see output in the terminal window as shown:
 
'''image here'''
 
Once the text has printed, you can close the flowgraph, and an exit message will be printed:
 
'''image here'''

Revision as of 15:35, 6 August 2020

On this page we'll walk through a few scenarios of running observations (both real and simulated) on the Allen Telescope Array with GNU Radio and the gr-ata module.

Step 0: Before you start...

In order to run an observation on the ATA, please know that you must coordinate with ATA staff to avoid interfering with science observing campaigns onsite.

Please find a catalog of astronomical sources recognized by the gr-ata module here: https://github.com/SETIatHCRO/gr-ata/blob/master/docs/ata-catalog.txt

Before beginning this tutorial, please make sure that you have installed GNU Radio version 3.8, gr-ata, and the ATA-Utils library, following the instructions here: Setting up the software

Tutorial 1: A Simulated ATA Observation

In this first tutorial, we will run through a simulated offline "observing" session -- although in this tutorial we won't be conducting real observations, it is a good idea to start here to make sure you understand what the gr-ata blocks are doing and get familiar with the system and terminology before starting your real observation. This mode of running the gr-ata blocks does not require you to be able to connect to the ATA computers, either, so it is a good place to start.

Let's first try a very simple test. Drag and drop an ATA Track Scan block and an ATA Control block into an empty flowgraph and connect their message ports as shown below.

image here

Make sure you have changed the ID field in the automatically-populated Options block to something besides default or the program won't run. Now double click the Control block to bring up the Properties window. Enter your username (for the offline tutorial this field doesn't matter, just type anything), then select Offline Mode from the Mode drop-down list, as shown. Click OK to apply your changes and close the Properties window.

image here

Now double click on the Track Scan block to view its properties. The first field is Frequency (MHz) -- enter any number of your choice here (it doesn't really matter what you enter in Offline Mode, just so long as it is a number). The next field is List of antennas; this field requires a string or list of strings as input, entered as shown. To simulate a real observing session, you could enter one or more of the actual antenna names of ATA antennas by choosing from the following list: 1a, 1b, 1c, 1d, 1e, 1f, 1g, 1h, 1j, 1k, 2a, 2b, 2c, 2d, 2e, 2f, 2g, 2h, 2j, 2k, 2l, 2m, 3c, 3d, 3e, 3f, 3g, 3h, 3j, 3l, 4e, 4f, 4g, 4h, 4j, 4k, 4l, 5b, 5c, 5e, 5g, 5h as shown. Next, select how you want to enter your target source in the Coordinate Type drop-down -- you can choose Catalog Identifier (as in the example below), RA / Dec, or Az / El. If you choose Catalog Identifier, a Source ID field will be displayed, where you can enter a source name -- in Offline Mode this source name can be anything, but in Observing Mode you must select an identifier from this catalog. If you select RA / Dec, separate RA and Dec fields will be displayed where you can enter your coordinates in decimal degrees; similarly if you select Az / El, Az and El fields will be displayed as well.

image here

Now that you have connected the two blocks and filled out the required fields, you can save your flowgraph then hit Run. You should see output in the terminal window as shown:

image here

Once the text has printed, you can close the flowgraph, and an exit message will be printed:

image here