Message Strobe: Difference between revisions

From GNU Radio
Jump to navigation Jump to search
Line 21: Line 21:


In another example, we change the frequency of a signal source to 1kHz after 5 seconds.
In another example, we change the frequency of a signal source to 1kHz after 5 seconds.
[[File:Signal_source_freq_msg_port.PNG]]
[[File:Signal_source_freq_msg_port.PNG]]
The message strobe settings in the above example are as follows:
The message strobe settings in the above example are as follows:
[[File:Message_strobe_settings.PNG | 400px]]
[[File:Message_strobe_settings.PNG | 400px]]



Revision as of 05:10, 29 December 2021

Send message at defined interval.

Takes a PMT message and sends it out every milliseconds. Useful for testing/debugging the message system.

The PMT to send seems to be settable also from the input port (please confirm that)

Parameters

(R): Run-time adjustable

Message PMT (R)
The message to send as a PMT.
Period (ms) (R)
The specified time interval after which data is sent at the output repeatedly.

Example Flowgraph

In this example, a Message Strobe block sends the string "Demo" once per second.

PUB SUB msg demo.png

In another example, we change the frequency of a signal source to 1kHz after 5 seconds.

Signal source freq msg port.PNG

The message strobe settings in the above example are as follows:

Message strobe settings.PNG

Source Files

C++ files
[1]
Header files
[2]
Public header files
[3]
Block definition
[4]