Message Strobe

From GNU Radio
Jump to navigation Jump to search

Send message at defined interval.

Takes a PMT message and sends it out every milliseconds. Useful for testing/debugging the message system.

The PMT to send seems to be settable also from the input port (please confirm that)

Parameters

(R): Run-time adjustable

Message PMT (R)
The message to send as a PMT.
Period (ms) (R)
The specified time interval after which data is sent at the output repeatedly.

Example Flowgraph

Example 1

In this example, a Message Strobe block sends the string "Demo" once per second.

PUB SUB msg demo.png

Example 2

In another example, we change the frequency of a signal source to 1kHz after 5 seconds.

Signal source freq msg port.PNG

The message strobe settings in the above example are as follows:

Message strobe settings.PNG

Example 3

Another example that uses a Message Strobe block can be found in gr-blocks/examples/msg_passing/strobe.grc.

Source Files

C++ files
[1]
Header files
[2]
Public header files
[3]
Block definition
[4]