OFDM Transmitter

From GNU Radio
Jump to navigation Jump to search

Hierarchical block for OFDM modulation.

The input is a byte stream (unsigned char) and the output is the complex modulated signal at baseband.

Parameters

FFT Length
The number of sub-carriers.
Cyclic Prefix Length
The maximum possible length of multi-paths in their time dispersion
Packet Length Tag Key
The name of the tag giving packet length at the input.
Occupied Carriers
A vector of vectors describing which OFDM carriers are occupied with data symbols.
Pilot Carriers
A vector of vectors describing which OFDM carriers are occupied with pilot symbols.
Pilot Symbols
A vector of vectors indicating the pilot symbols.
Sync Word 1
The first sync preamble symbol. This has to be with zeros on alternating carriers (0., 1.536, 0., -1.536, 0., ...). Used for fine and coarse frequency offset and timing estimation. Length of sync sequence must be the same as the value of FFT length. To not use a sync word, None can be entered as this parameter's value.
Sync Word 2
The second sync preamble symbol. This has to be filled entirely. Also used for coarse frequency offset and channel estimation. Length of sync sequence must be the same as the value of FFT length. To not use a sync word, None can be entered as this parameter's value.
Header Modulation
  • BPSK
  • QPSK
Payload Modulation
  • BPSK
  • QPSK
  • 8-PSK
Rolloff length (samples)
The rolloff length in samples. Must be smaller than the CP.
Scramble Bits
Activates the scramblers (set this to True unless debugging)
Log Debug Info
Write output into log files (Warning: creates lots of data!)

Example Flowgraph

This flowgraph can be found at https://github.com/gnuradio/gnuradio/blob/master/gr-digital/examples/ofdm/ofdm_loopback.grc

Ofdm loopback example fg.png

Source Files

Python files
[1]
Block definition
[2]