QT GUI Bercurve Sink: Difference between revisions

From GNU Radio
Jump to navigation Jump to search
(add example flowgraph)
(revise Introduction)
 
Line 1: Line 1:
[[Category:Block Docs]]
The Bercurve Sink block creates a plot of Bit Error Rate versus Signal to Noise ratio (ES/No). The block calculates the BER itself internally by comparing the original data (pre-distortion) from input <code>i</code> with the post-distortion, post-decoding data on input <code>i+1</code>. So <code>(input_items[i] XOR input_items[i+1])</code> is the BER to plot for that particular Es/No point. Each curve is made with 8 data points, thus requiring 16 input ports.
This block is lacking information. Please add some.
 
The Bercurve Sink can operate in two modes:
* Separate input ports
* Bus input ports
== Separate input ports ==
 
Using gnuradio-companion (GRC), the default configuration of a new Bercurve Sink is with 16 separate input ports <b>per curve</b>. The ports are paired: (0, 1), (2, 3), ... (14,15). Each input pair produces one point on the corresponding curve.
 
== Bus input ports ==


It would seem this block takes a pair of byte input for each desired point in the BER curve and compare them to get the corresponding value.  
Instead of having so many separate input ports (16 times the number of curves), the sink can operate in the "Bus" mode, where all the data for one curve is grouped into one "bus". To activate this mode, right click on the Bercurve Sink block, select "More", then select "Toggle Sink Bus". This mode matches the output of a "BER Curve Gen." block. See the example flowgraph below.  


== Parameters ==
== Parameters ==


; esno
; esno
: Vector of SNR (ES/No) values to plot for. Number of input is len(esno)*2*Num Curves.
: Vector of SNR (ES/No) values to plot for. Typical value is <code>numpy.arange (0, 8, .5)</code>


; Min. BER Errs.
; Min. BER Errs.
Line 70: Line 79:
; Block definition
; Block definition
: [https://github.com/gnuradio/gnuradio/blob/master/gr-qtgui/grc/qtgui_ber_sink_b.block.yml]
: [https://github.com/gnuradio/gnuradio/blob/master/gr-qtgui/grc/qtgui_ber_sink_b.block.yml]
[[Category:Block Docs]]

Latest revision as of 13:48, 19 April 2020

The Bercurve Sink block creates a plot of Bit Error Rate versus Signal to Noise ratio (ES/No). The block calculates the BER itself internally by comparing the original data (pre-distortion) from input i with the post-distortion, post-decoding data on input i+1. So (input_items[i] XOR input_items[i+1]) is the BER to plot for that particular Es/No point. Each curve is made with 8 data points, thus requiring 16 input ports.

The Bercurve Sink can operate in two modes:

  • Separate input ports
  • Bus input ports

Separate input ports

Using gnuradio-companion (GRC), the default configuration of a new Bercurve Sink is with 16 separate input ports per curve. The ports are paired: (0, 1), (2, 3), ... (14,15). Each input pair produces one point on the corresponding curve.

Bus input ports

Instead of having so many separate input ports (16 times the number of curves), the sink can operate in the "Bus" mode, where all the data for one curve is grouped into one "bus". To activate this mode, right click on the Bercurve Sink block, select "More", then select "Toggle Sink Bus". This mode matches the output of a "BER Curve Gen." block. See the example flowgraph below.

Parameters

esno
Vector of SNR (ES/No) values to plot for. Typical value is numpy.arange (0, 8, .5)
Min. BER Errs.
BER Limit
Num Curves
Number of curves to draw on the same graph
Curve Names
Y min
Y max
Update Period
GUI Hint
See GUI Hint for info about how to organize multiple QT GUIs
Line X Label
Line X Width
Line X Color
Line X Style
Line X Marker
Line X Alpha

Example Flowgraph

This flowgraph is derived from https://github.com/gnuradio/gnuradio/blob/master/gr-fec/examples/ber_curve_gen.grc

Ber curve gen fg.png

Source Files

C++ files
[1]
Header files
[2]
Public header files
[3]
Block definition
[4]