QT GUI Eye Sink: Difference between revisions

From GNU Radio
Jump to navigation Jump to search
No edit summary
No edit summary
Line 49: Line 49:
within 0 - t_max where t_max is the maximum amount of time
within 0 - t_max where t_max is the maximum amount of time
displayed on the eye pattern equal to 2 symbol time.
displayed on the eye pattern equal to 2 symbol time.


== Parameters ==
== Parameters ==

Revision as of 17:04, 19 May 2020

A graphical sink to display eye diagrams

This is a QT-based graphical sink which takes a set of a complex streams and plots them as an eye pattern. For each signal, both the signal's I and Q eye patterns are plotted. Eye patterns are 2 symbol's time long. Symbol rate must be an integer multiple of the sample rate to obtain the eye pattern. The set_title and set_color functions can be used to change the label and color for a given input number.

Trigger occurs at the beginning of each stream used to plot the eye pattern; whilst a real eye diagram would be triggered with a (recovered) symbol clock. For these reasons, triggering of noisy and/or unsynchronized signals may lead to incorrect eye pattern.

The sink supports plotting streaming complex data or messages. The message port is named "in". The two modes cannot be used simultaneously, and nconnections should be set to 0 when using the message mode. GRC handles this issue by providing the "Complex Message" type that removes the streaming port(s).

This sink can plot messages that contain either uniform vectors of complex 32 values (pmt::is_c32vector) or PDUs where the data is a uniform vector of complex 32 values.

See GUI Hint for info about how to organize multiple QT GUIs

Triggering Info

Set up a trigger for the sink to know when to start plotting. Useful to isolate events and avoid noise.

The trigger modes are Free, Auto, Normal, and Tag (see gr::qtgui::trigger_mode). The first three are like a normal oscope trigger function. Free means free running with no trigger, auto will trigger if the trigger event is seen, but will still plot otherwise, and normal will hold until the trigger event is observed. The Tag trigger mode allows us to trigger off a specific stream tag. The tag trigger is based only on the name of the tag, so when a tag of the given name is seen, the trigger is activated.

In auto and normal mode, we look for the slope of the of the signal. Given a gr::qtgui::trigger_slope as either Positive or Negative, if the value between two samples moves in the given direction (x[1] > x[0] for Positive or x[1] < x[0] for Negative), then the trigger is activated.

With the complex eye sink, each input has two eye patterns drawn for the real and imaginary parts of the signal. When selecting the \p channel value, channel 0 is the real signal and channel 1 is the imaginary signal. For more than 1 input stream, channel 2i is the real part of the ith input and channel (2i+1) is the imaginary part of the ith input channel.

The \p delay value is specified in time based off the sample rate. If the sample rate of the block is set to 1, the delay is then also the sample number offset. This is the offset from the left-hand y-axis of the plot. It delays the signal to show the trigger event at the given delay along with some portion of the signal before the event. The delay must be within 0 - t_max where t_max is the maximum amount of time displayed on the eye pattern equal to 2 symbol time.

Parameters

samp_rate
sample rate (used to set x-axis labels)
name
title for the plot
nconnections
number of signals connected to sink
parent
a QWidget parent object, if any
trigger_mode
free, auto, normal, or tag.
slope
The trigger_slope: positive or negative. Only used for auto and normal modes.
level
The magnitude of the trigger even for auto or normal modes.
delay
The delay (in units of time) for where the trigger happens.
channel
Which input channel to use for the trigger events.
tag_key
The name (as a string) of the tag to trigger off of if using the tag mode.

Example Flowgraph

(Currently missing the flowgraph that generated this output)

Eye.png