Quadrature Demod: Difference between revisions

From GNU Radio
Jump to navigation Jump to search
No edit summary
No edit summary
Line 6: Line 6:
Mathematically, this block calculates the product of the one-sample
Mathematically, this block calculates the product of the one-sample
delayed input and the conjugate undelayed signal, and then calculates
delayed input and the conjugate undelayed signal, and then calculates
the argument of the resulting complex number:
the argument (a.k.a. angle, in radians) of the resulting complex number:


<math>y[n] = \mathrm{arg}\left(x[n] \, \bar x [n-1]\right)</math>
<math>y[n] = \mathrm{arg}\left(x[n] \, \bar x [n-1]\right)</math>

Revision as of 07:05, 4 December 2020

This can be used to demod FM, FSK, GMSK, etc. The input is complex baseband, output is the signal frequency in relation to the sample rate, multiplied with the gain.

Mathematically, this block calculates the product of the one-sample delayed input and the conjugate undelayed signal, and then calculates the argument (a.k.a. angle, in radians) of the resulting complex number:

Let x be a complex sinusoid with amplitude A>0, (absolute) frequency f\in\mathbb R and phase sampled at f_s>0 so, without loss of generality,

then

is real, so is and hence only scales, therefore is invariant: = arg

Parameters

Gain
Gain setting to adjust the output amplitude. Set based on converting the phase difference between samples to a nominal output value.

Example Flowgraph

This flowgraph shows the Quadrature Demod block as a Frequency Shift Keying detector.

RTTY rcv.png

Source Files

C++ files
[1]
Header files
[2]
Public header files
[3]
Block definition
[4]