Rational Resampler

From GNU Radio
Jump to navigation Jump to search
The printable version is no longer supported and may have rendering errors. Please update your browser bookmarks and please use the default browser print function instead.

Rational resampling polyphase FIR filter.

Either taps or fractional_bw may be specified, but not both.

If neither is specified, a reasonable default, 0.4, is used as the fractional_bw.

This block only works when the output language of the flowgraph is Python.

Parameters

(R): Run-time adjustable

Interpolation
Interpolation factor (integer > 0)
Decimation
Decimation factor (integer > 0)
Taps (R)
Optional filter coefficients (sequence)
Fractional BW
Fractional bandwidth in (0, 0.5), measured at final freq (use 0.4) (float). In GNU Radio 3.8, the default value is 0, which should either be changed to a value 'between' 0 and 0.5; or just removed. Removing the value of fractional bandwidth will cause the block to use the default value of 0.4.

Example Flowgraph

This flowgraph shows a Rational Resampler block changing the sample rate from 960 to 500.

RTTY rcv.png

Source Files

C++ files
[1]
Header files
[2]
Block definition
[3]