Rotator

From GNU Radio
Revision as of 01:09, 25 April 2021 by Duggabe (talk | contribs) (clarification)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to: navigation, search

Makes a complex rotator block. The phase increment (in radians) is the amount of additional phase shift added to the signal every sample. So, the rotator block is the equivalent of multiplying by a complex sine. The "increment" is the amount of additional phase shift added to the signal every sample. So, the block is the equivalent of multiplying by a complex sine.

Parameters[edit]

(R): Run-time adjustable

Phase Increment (R)
Acts as the rotational velocity.

Example Flowgraph[edit]

In the example below a constant source, set to 0.5, is fed into the rotator, thus producing a sine wave. The phase increment is set to 0.01 radians and the sample rate is 100kHz, so that equates to 1000 radians every second, or 1000/(2pi) = 159 cycles per second. This corresponds to a period of about 6ms, as shown in the time sink.

Rotator-ex.png

Source Files[edit]

C++ files
TODO
Header files
TODO
Public header files
TODO
Block definition
TODO