Runtime Updating Variables

From GNU Radio
Revision as of 19:20, 14 March 2022 by Mattcarrick (talk | contribs) (→‎QT GUI Chooser)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to navigation Jump to search
Beginner Tutorials

Introducing GNU Radio

  1. What is GNU Radio?
  2. Installing GNU Radio
  3. Your First Flowgraph

Flowgraph Fundamentals

  1. Python Variables in GRC
  2. Variables in Flowgraphs
  3. Runtime Updating Variables
  4. Signal Data Types
  5. Converting Data Types
  6. Packing Bits
  7. Streams and Vectors
  8. Hier Blocks and Parameters

Creating and Modifying Python Blocks

  1. Creating Your First Block
  2. Python Block With Vectors
  3. Python Block Message Passing
  4. Python Block Tags

DSP Blocks

  1. Low Pass Filter Example
  2. Designing Filter Taps
  3. Sample Rate Change

This tutorial describes how to update variables while a flowgraph is running using QT GUI Widgets.

Please review the previous tutorial, Variables in Flowgraphs, for an introduction to variables. The next tutorial, Signal Data Types, discusses data types and representing complex and real signals in GNU Radio.

QT GUI Range

The GNU Radio block library comes with QT GUI widgets. The widgets allow interaction and modification to a flowgraph while running. The QT GUI Range widget creates a slider bar that can be used to update a variable.

Search for range in the block library:

SearchQTGUIRange.png

Drag and drop the QT GUI Range block into the workspace:

DragDropQTGUIRange.png


The QT GUI Range works like a variable block. The default parameters for the QT GUI Range need to be set. Double-click on the QT GUI Range block to edit the properties. The QT GUI Range block will replace the frequency variable, so first change the Id field to frequency.

The Default Value is the value when the flowgraph starts. Set the Default Value to 0. The Start and Stop are the start and stop values of the slider. Enter -samp_rate/2 as the start value and samp_rate/2 as the stop value. The Step value is the resolution of the slider. In this example the Step is set to 100 Hz:

SetRangeProperties.png

An error message is displayed:

ID "frequency" is not unique.

The error message is displayed because there a variable block and the QT GUI Range are both using the name frequency. This problem will be addressed shortly. Click OK to save the properties.

Right click on the variable block and select Disable, or press D on the keyboard:

DisableVariableBlock.png

The block is now ignored and the error is resolved.

VariableBlockDisabled.png


Run the flowgraph by clicking the arrow or Play button:

RunFlowgraphButton.png


The flowgraph starts with a frequency of 0, the default value entered into the QT GUI Range block:

QTGUIRangeDefaultValue.png


The frequency parameter can then be updated by:

  1. Dragging the slider bar
  2. Entering a value
  3. Click up or down arrows

QTGUIRangeDragSlider.png

The frequency has been updated to -5000 which is reflected in orange in the frequency spectrum plot.

QT GUI Chooser

The QT GUI Chooser creates a drop-down menu of options for a variable. Navigate the block library: Core, GUI Widgets, QT, and drag and drop QT GUI Chooser into the workspace.

QTGUIChooserLibraryBlock.png


Update the default parameters for the Chooser block. The Chooser creates a list of options to select from while the flowgraph is running. In this example three frequencies are used: 0, 1000 and -2000. Update the following properties in the Chooser block:

  1. Id: frequency
  2. Default Option: 0
  3. Option 0: 0
  4. Label 0: Frequency: 0
  5. Option 1: 1000
  6. Label 1: Frequency: 1000
  7. Option 2: -2000
  8. Label 2: Frequency: -2000

The Option field is the value of the variable, Label is a text description that is displayed in the drop-down menu. The image shows an example of the Option being highlighted in orange and the Label being highlighted in red:

QTGUIChooserUpdateProperties.png


Click OK to save the parameters. Running the flowgraph will use the default value Frequency: 0 when starting. The drop-down box in the upper left hand corner shows that frequency 0 has been selected. The time domain and frequency domain both show a signal with frequency 0:

QTGUIChooserDefaultValue.png


The values are selected by clicking on the drop-down menu. Click on Frequency: 1000:

SelectFromQTGUIChooser.png


The updated frequency is seen in the frequency spectrum:

QTGUIChooserOptionSelected.png


The next tutorial, Signal Data Types, discusses data types and representing complex and real signals in GNU Radio.