Unpack K Bits: Difference between revisions

From GNU Radio
Jump to navigation Jump to search
(Created page with "Category:Block Docs Opposite of Pack K Bits make(unsigned int k) -> unpack_k_bits_bb_sptr Converts a byte with k relevant bits to k output bytes with 1 bit in...")
 
No edit summary
Line 1: Line 1:
[[Category:Block Docs]]
[[Category:Block Docs]]
Opposite of [[Pack K Bits]]
Opposite of [[Pack K Bits]] - Converts a byte with k relevant bits to k output bytes with 1 bit each, located in the LSB.


make(unsigned int k) -> unpack_k_bits_bb_sptr
In other words, this block picks the K least significant bits from a byte, and expands them into K bytes of 0 or 1.
        Converts a byte with k relevant bits to k output bytes with 1 bit in the LSB.
 
        This block picks the K least significant bits from a byte, and expands them into K bytes of 0 or 1.
Example:
        Example: k = 4 in = [0xf5, 0x08] out = [0,1,0,1, 1,0,0,0]
 
        Constructor Specific Documentation:
k = 4
        Make an unpack_k_bits block.
 
        Args:
in = [0xf5, 0x08]
            k : number of bits to unpack.
 
out = [0,1,0,1,1,0,0,0]
 
Each input byte produced four output bytes (that are either 0 or 1). Remember that there is no item type of "bit" in GNU Radio, so we have to use bytes to represent single bits.

Revision as of 23:25, 3 May 2019

Opposite of Pack K Bits - Converts a byte with k relevant bits to k output bytes with 1 bit each, located in the LSB.

In other words, this block picks the K least significant bits from a byte, and expands them into K bytes of 0 or 1.

Example:

k = 4

in = [0xf5, 0x08]

out = [0,1,0,1,1,0,0,0]

Each input byte produced four output bytes (that are either 0 or 1). Remember that there is no item type of "bit" in GNU Radio, so we have to use bytes to represent single bits.