User:Muaddib: Difference between revisions

From GNU Radio
Jump to navigation Jump to search
Line 43: Line 43:
==Simple Example==
==Simple Example==
Open the [https://github.com/gnuradio/gnuradio/blob/maint-3.9/gr-blocks/examples/xmlrpc/siggen_controller_xmlrpc_client.grc siggen_controller_xmlrpc_client.grc] flowgraph  
Open the [https://github.com/gnuradio/gnuradio/blob/maint-3.9/gr-blocks/examples/xmlrpc/siggen_controller_xmlrpc_client.grc siggen_controller_xmlrpc_client.grc] flowgraph  
Shown here:
Shown here:
<screenshot.jpg>
<screenshot.jpg>


Open the [https://github.com/gnuradio/gnuradio/blob/maint-3.9/gr-blocks/examples/xmlrpc/siggen_xmlrpc_server.grc siggen_xmlrpc_server.grc] flowgraph.  
Open the [https://github.com/gnuradio/gnuradio/blob/maint-3.9/gr-blocks/examples/xmlrpc/siggen_xmlrpc_server.grc siggen_xmlrpc_server.grc] flowgraph.  
Shown here:
Shown here:
<screenshot.jpg>
<screenshot.jpg>


First, Run the Siggen Server Flowgraph
First, Run the Siggen Server Flowgraph
Your GUI window should look like this:
Your GUI window should look like this:
<screenshot.jpg>
<screenshot.jpg>


Next, run the Siggen Controller flowgraph
Next, run the Siggen Controller flowgraph
Your GUI window should look like this:
Your GUI window should look like this:
<screenshot.jpg>
<screenshot.jpg>



Revision as of 00:20, 25 November 2021

Understanding XMLRPC Blocks

This tutorial presents the GNU Radio XMLRPC blocks. There are two blocks in this collection: XMLRPC Client and XMLRPC Server. Both blocks have IP address/port fields while the Client block also has callback and variable fields. The blocks use the Python XMLRPC module and use a subset of the full XMLRPC spec.

XMLRPC is an XML-based Remote Protocol Control mechanism that does just that. It uses HTTP transport and allows a client to use SET commands to change parameters on a server or use GET commands to obtain the value of parameters on the server.

To understand better how GNURadio implements XMLRPC, look at the block documentation linked in the paragraph above.

To understand the XMLRPC protocol and Python implementation in detail, the reference links below are a good starting point.

Reference Links

http://xmlrpc.com

https://docs.python.org/3.8/library/xmlrpc.html

Prerequisites

Introduction: What does XMLRPC do in GNURadio and Why Should I Care?

WHAT: In GNURadio placing the XMLRPC Server block in a flowgraph will create an XMLRPC server that exposes all the variables in the flowgraph on the specified IP Address and Port. This allows a client to change them at runtime. The XMLRPC Client block allows the user to create a flowgraph that can control any of the parameters in a flowgraph that has the XMLRPC Server block.

WHY: In many cases, we want to adjust the variables of a GNURadio flowgraph at runtime. We usually do this by adding QT GUI Widget block (range, push button, etc). But what if you want to have the same control interface, but in a different flowgraph? XMLRPC will allow you to control all of a flowgraph's variables from a second flowgraph using HTTP. In fact, the second flowgraph doesn't even have to be on the same computer! Therefore, XMLRPC can be used to add runtime control of any flowgraph running on a remote system like a Raspberry PI, headless server or otherwise.

Contents of Tutorial

GNURadio XMLRPC Examples

  • We will start with running the basic client/server example flowgraphs from the GNU Radio source tree (gr-blocks/examples/xmlrpc).

GNURadio XMLRPC Examples with ZMQ Streaming Data Visualization

  • Here we will modify the examples to include ZMQ streaming so we can visualize the remote flowgraph's datastream in our XMLRPC Client flowgraph.

GNURadio XMLRPC Remote Control Over IP Network

  • Next, we will run the server/client pair over an IP network using 2 separate computers. (Requires 2 hosts on the same network with GNURadio 3.9+ installed)

GNURadio XMLRPC Advanced Usage Example

  • (OPTIONAL) As a bonus step we will run a project that implements a remote, headless wideband RF receiver and stream the data to a Remote Controller for control and visualization.

Simple Example

Open the siggen_controller_xmlrpc_client.grc flowgraph

Shown here:

<screenshot.jpg>

Open the siggen_xmlrpc_server.grc flowgraph.

Shown here:

<screenshot.jpg>

First, Run the Siggen Server Flowgraph

Your GUI window should look like this:

<screenshot.jpg>

Next, run the Siggen Controller flowgraph

Your GUI window should look like this:

<screenshot.jpg>

Move both GUI windows so you can see them at the same time. Adjust the Frequency Slider in the Siggen Controller Flowgraph and observe the Siggen Server time/frequency display. You should see the frequency changing as shown here:


That's it, you've just remote controlled a flowgraph over a network socket!

Close both GUI windows and continue to the next tutorial.

GNURadio XMLRPC Examples with ZMQ Streaming Data Visualization

For reference, make sure you are familiar with ZMQ streaming from the ZMQ tutorials Create a copy of both example flowgraphs called "siggen_xmlrpc_server_streaming.grc" and "siggen_xmlrpc_controller_streaming.grc" In the controller


GNURadio XMLRPC Remote Control Over IP Network

GNURadio XMLRPC Advanced Usage Example

  • audio output to ZMQ