VCO (complex)

From GNU Radio
Revision as of 13:09, 17 March 2021 by 172.18.0.3 (talk) (there's no volts in digital signal processing)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to navigation Jump to search
The printable version is no longer supported and may have rendering errors. Please update your browser bookmarks and please use the default browser print function instead.

VCO - Voltage controlled oscillator. Produces a sinusoid of frequency based on the amplitude of the input. See VCO for a real (not complex) sinusoidal output.

input: float stream of control voltages;

output: complex oscillator output

Parameters

Sample Rate
sampling rate (Hz)
Sensitivity
units are radians/sec/(input unit)
Amplitude
output amplitude

Example Flowgraph

This flowgraph shows a Radioteletype (RTTY) transmitter and receiver. The upper portion is the transmitter. The parameters for the VCO are explained in VCO.
The lower portion of the flowgraph is a single sideband (SSB) receiver. The audio can be fed into a RTTY decoder such as shown in Sample_Rate_Tutorial#Source_hardware_example.

USRP RTTY fg.png

Source Files

C++ files
TODO
Header files
TODO
Public header files
TODO
Block definition
TODO