ZMQ PUB Message Sink: Difference between revisions

From GNU Radio
Jump to navigation Jump to search
(add example flowgraph)
(add note about IP addresses)
 
Line 7: Line 7:
; Address
; Address
: ZMQ socket address specifier. The format of the address is <code>tcp://*:port</code> where * should be 127.0.0.1 for localhost.<br>
: ZMQ socket address specifier. The format of the address is <code>tcp://*:port</code> where * should be 127.0.0.1 for localhost.<br>
: <b>Note:</b> If the Source and Sink blocks are on two different computers on the same LAN, then the IP and port number of the Sink block must be specified on each end of that connection. For example, if the Sink is on IP 192.168.2.14:5678 and the Source is on IP 192.168.2.5, both Source and Sink blocks must specify the Sink IP and port (192.168.2.14:5678).


; timeout
; timeout

Latest revision as of 15:08, 26 March 2020

The ZMQ PUB Message Sink receives messages from a flowgraph and publishes them on a ZMQ PUB socket. A PUB socket may have many subscribers and will pass all incoming messages to each subscriber. Subscribers can be either a ZMQ SUB Message Source block or a non-GNU Radio ZMQ socket.

Parameters

(R): Run-time adjustable

Address
ZMQ socket address specifier. The format of the address is tcp://*:port where * should be 127.0.0.1 for localhost.
Note: If the Source and Sink blocks are on two different computers on the same LAN, then the IP and port number of the Sink block must be specified on each end of that connection. For example, if the Sink is on IP 192.168.2.14:5678 and the Source is on IP 192.168.2.5, both Source and Sink blocks must specify the Sink IP and port (192.168.2.14:5678).
timeout
Socket timeout in milliseconds, default is 100ms.

Example Flowgraph

In this example, a Message Strobe block sends the string "Demo" once per second.

PUB SUB msg demo.png

Source Files

C++ files
TODO
Header files
TODO
Public header files
TODO
Block definition
TODO