ZMQ PUB Message Sink: Difference between revisions
Jump to navigation
Jump to search
No edit summary |
(add note about IP addresses) |
||
(One intermediate revision by the same user not shown) | |||
Line 1: | Line 1: | ||
[[Category:Block Docs]] | [[Category:Block Docs]] | ||
The ZMQ PUB Message Sink receives messages from a flowgraph and publishes them on a ZMQ PUB socket. A PUB socket may have many subscribers and will pass all incoming messages to each subscriber. Subscribers can be either a ZMQ SUB Message Source block or a non-GNU Radio ZMQ socket. | |||
A PUB socket may have subscribers and will pass all incoming messages to each subscriber. | |||
Subscribers can be either | |||
== Parameters == | == Parameters == | ||
Line 10: | Line 6: | ||
; Address | ; Address | ||
: ZMQ socket address specifier | : ZMQ socket address specifier. The format of the address is <code>tcp://*:port</code> where * should be 127.0.0.1 for localhost.<br> | ||
: <b>Note:</b> If the Source and Sink blocks are on two different computers on the same LAN, then the IP and port number of the Sink block must be specified on each end of that connection. For example, if the Sink is on IP 192.168.2.14:5678 and the Source is on IP 192.168.2.5, both Source and Sink blocks must specify the Sink IP and port (192.168.2.14:5678). | |||
; timeout | ; timeout | ||
: | : Socket timeout in milliseconds, default is 100ms. | ||
== Example Flowgraph == | == Example Flowgraph == | ||
In this example, a Message Strobe block sends the string "Demo" once per second. | |||
[[File:PUB_SUB_msg_demo.png]] | |||
== Source Files == | == Source Files == |
Latest revision as of 15:08, 26 March 2020
The ZMQ PUB Message Sink receives messages from a flowgraph and publishes them on a ZMQ PUB socket. A PUB socket may have many subscribers and will pass all incoming messages to each subscriber. Subscribers can be either a ZMQ SUB Message Source block or a non-GNU Radio ZMQ socket.
Parameters
(R): Run-time adjustable
- Address
- ZMQ socket address specifier. The format of the address is
tcp://*:port
where * should be 127.0.0.1 for localhost. - Note: If the Source and Sink blocks are on two different computers on the same LAN, then the IP and port number of the Sink block must be specified on each end of that connection. For example, if the Sink is on IP 192.168.2.14:5678 and the Source is on IP 192.168.2.5, both Source and Sink blocks must specify the Sink IP and port (192.168.2.14:5678).
- timeout
- Socket timeout in milliseconds, default is 100ms.
Example Flowgraph
In this example, a Message Strobe block sends the string "Demo" once per second.
Source Files
- C++ files
- TODO
- Header files
- TODO
- Public header files
- TODO
- Block definition
- TODO