ZMQ PUSH Message Sink: Difference between revisions

From GNU Radio
Jump to navigation Jump to search
No edit summary
(add note about IP addresses)
 
(One intermediate revision by the same user not shown)
Line 1: Line 1:
[[Category:Block Docs]]
[[Category:Block Docs]]
Sink the contents of a msg port to a ZMQ PUSH socket.
The ZMQ PUSH Message Sink block receives pmt messages from a message port and sends them through a ZMQ PUSH socket. It performs a 'bind' on the designated port. It will interoperate with a ZMQ PULL socket, either from a GNU Radio flowgraph or an external process.
 
This block acts a message port receiver and writes individual messages to a ZMQ PUSH socket. The corresponding receiving ZMQ PULL socket can be either another gr-zeromq source block or a non-GNU Radio ZMQ socket.


== Parameters ==
== Parameters ==
Line 8: Line 6:


; Address
; Address
: ZMQ socket address specifier
: ZMQ socket address specifier. The format of the address is <code>tcp://*:port</code> where * should be 127.0.0.1 for localhost.<br>
: <b>Note:</b> If the Source and Sink blocks are on two different computers on the same LAN, then the IP and port number of the Sink block must be specified on each end of that connection. For example, if the Sink is on IP 192.168.2.14:5678 and the Source is on IP 192.168.2.5, both Source and Sink blocks must specify the Sink IP and port (192.168.2.14:5678).


; Timeout
; Timeout
: Receive timeout in milliseconds, default is 100ms, 1us increments
: Receive timeout in milliseconds, default is 100ms.


== Example Flowgraph ==
== Example Flowgraph ==


Insert description of flowgraph here, then show a screenshot of the flowgraph and the output if there is an interesting GUI.  Currently we have no standard method of uploading the actual flowgraph to the wiki or git repo, unfortunately.  The plan is to have an example flowgraph showing how the block might be used, for every block, and the flowgraphs will live in the git repo.
[[File:ZMQ_PUSH_msg_test_fg.png]]


== Source Files ==
== Source Files ==

Latest revision as of 15:14, 26 March 2020

The ZMQ PUSH Message Sink block receives pmt messages from a message port and sends them through a ZMQ PUSH socket. It performs a 'bind' on the designated port. It will interoperate with a ZMQ PULL socket, either from a GNU Radio flowgraph or an external process.

Parameters

(R): Run-time adjustable

Address
ZMQ socket address specifier. The format of the address is tcp://*:port where * should be 127.0.0.1 for localhost.
Note: If the Source and Sink blocks are on two different computers on the same LAN, then the IP and port number of the Sink block must be specified on each end of that connection. For example, if the Sink is on IP 192.168.2.14:5678 and the Source is on IP 192.168.2.5, both Source and Sink blocks must specify the Sink IP and port (192.168.2.14:5678).
Timeout
Receive timeout in milliseconds, default is 100ms.

Example Flowgraph

ZMQ PUSH msg test fg.png

Source Files

C++ files
TODO
Header files
TODO
Public header files
TODO
Block definition
TODO
Retrieved from "https://wiki.gnuradio.org/index.php?title=ZMQ_PUSH_Message_Sink&oldid=6792"