ZMQ REQ Source

From GNU Radio
Revision as of 06:20, 23 June 2023 by 777arc (talk | contribs) (→‎Example Flowgraph)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to navigation Jump to search

Receive messages on ZMQ REQ socket and source stream.

This block will connect to a ZMQ REP socket, then produce all incoming messages as streaming output.

Parameters

(R): Run-time adjustable

Address
ZMQ socket address specifier. The format of the address is tcp://*:port where * should be 127.0.0.1 for localhost.
Note: If the Source and Sink blocks are on two different computers on the same LAN, then the IP and port number of the Sink block must be specified on each end of that connection. For example, if the Sink is on IP 192.168.2.14:5678 and the Source is on IP 192.168.2.5, both Source and Sink blocks must specify the Sink IP and port (192.168.2.14:5678).
Timeout
Receive timeout in milliseconds, default is 100ms.
Pass Tags
Whether sink will serialize and pass tags over the link.
High Watermark
High Watermark to configure the socket to (-1 => zmq's default)

Example Flowgraph

TODO

Source Files

C++ files
req_msg_source_impl.cc
req_source_impl.cc
Header files
req_msg_source_impl.h
req_source_impl.h
Block definition
zeromq_req_msg_source.block.yml
zeromq_req_source.block.yml