ZMQ SUB Message Source

From GNU Radio
Revision as of 17:13, 28 November 2023 by Nsdoukos (talk | contribs) (Add source files)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to navigation Jump to search

The ZMQ SUB Message Source block receives messages from a ZMQ SUB socket and outputs async messages. This block will connect to a ZMQ PUB Message Sink or a non-GNU Radio ZMQ socket.

Parameters

(R): Run-time adjustable

Address
ZMQ socket address specifier. The format of the address is tcp://*:port where * should be 127.0.0.1 for localhost.
Note: If the Source and Sink blocks are on two different computers on the same LAN, then the IP and port number of the Sink block must be specified on each end of that connection. For example, if the Sink is on IP 192.168.2.14:5678 and the Source is on IP 192.168.2.5, both Source and Sink blocks must specify the Sink IP and port (192.168.2.14:5678).
Timeout
Receive timeout in milliseconds, default is 100ms.

Example Flowgraph

In this example, the ZMQ SUB Message Source block is receiving a message and displaying it on the user's terminal.

PUB SUB msg demo.png

Source Files

C++ files
/gr-zeromq/lib/sub_msg_source_impl.cc
Header files
/gr-zeromq/lib/sub_msg_source_impl.h
Public header files
/gr-zeromq/include/gnuradio/zeromq/sub_msg_source.h
Block definition
/gr-zeromq/grc/zeromq_sub_msg_source.block.yml