ZMQ SUB Source: Difference between revisions

From GNU Radio
Jump to navigation Jump to search
(added a note template about ZMQ endpoints. It doesn't look good in the preview, but I have to save it to see how it will finally render)
Line 10: Line 10:
: ZMQ socket address specifier. The format of the address is <code>tcp://*:port</code> where * should be 127.0.0.1 for localhost.<br>
: ZMQ socket address specifier. The format of the address is <code>tcp://*:port</code> where * should be 127.0.0.1 for localhost.<br>
: <b>Note:</b> If the Source and Sink blocks are on two different computers on the same LAN, then the IP and port number of the Sink block must be specified on each end of that connection. For example, if the Sink is on IP 192.168.2.14:5678 and the Source is on IP 192.168.2.5, both Source and Sink blocks must specify the Sink IP and port (192.168.2.14:5678).
: <b>Note:</b> If the Source and Sink blocks are on two different computers on the same LAN, then the IP and port number of the Sink block must be specified on each end of that connection. For example, if the Sink is on IP 192.168.2.14:5678 and the Source is on IP 192.168.2.5, both Source and Sink blocks must specify the Sink IP and port (192.168.2.14:5678).
: {{note|ZMQ endpoints **look** like URLs but they are not. A "tcp" endpoint specifies an IP address or a _network adapter_ (e.g., **lo** or **eth0**). Do not use hostnames, like "localhost"|warn}}


; Timeout  
; Timeout  

Revision as of 03:50, 12 August 2022

Receive messages on ZMQ SUB socket and source stream.

This block will connect to a ZMQ PUB socket, then produce all incoming messages as streaming output.

Parameters

(R): Run-time adjustable

Address
ZMQ socket address specifier. The format of the address is tcp://*:port where * should be 127.0.0.1 for localhost.
Note: If the Source and Sink blocks are on two different computers on the same LAN, then the IP and port number of the Sink block must be specified on each end of that connection. For example, if the Sink is on IP 192.168.2.14:5678 and the Source is on IP 192.168.2.5, both Source and Sink blocks must specify the Sink IP and port (192.168.2.14:5678).
<templatestyles src="Note/style.css" />
ZMQ endpoints **look** like URLs but they are not. A "tcp" endpoint specifies an IP address or a _network adapter_ (e.g., **lo** or **eth0**). Do not use hostnames, like "localhost"


{ style = background-color: #fff9ea; /* File:OOjs UI icon alert-warning.svg */ background-image: url(https://upload.wikimedia.org/wikipedia/commons/3/3b/OOjs_UI_icon_alert-warning.svg); background-size: 25px; border-color: #fc3; min-height: 28px; }

Timeout
Receive timeout in milliseconds, default is 100ms.
Pass Tags
Whether source will look for and deserialize tags.
Hign Watermark
High Watermark to configure the socket to (-1 => zmq's default)

Example Flowgraph

This is a flowgraph of an Amplitude Modulation receiver. The signal from the transmitter section is received by the ZMQ SUB Source. It is a 48khz carrier with a sample rate of 768khz. For complete details, see Simulation_example:_AM_transmitter_and_receiver#AM_receiver.

AM receive fg.png

Source Files

C++ files
TODO
Header files
TODO
Public header files
TODO
Block definition
TODO