OFDM Receiver: Difference between revisions
Jump to navigation
Jump to search
| (5 intermediate revisions by the same user not shown) | |||
| Line 17: | Line 17: | ||
; Occupied Carriers | ; Occupied Carriers | ||
: A vector of vectors describing which OFDM carriers are occupied. | : A vector of vectors describing which OFDM carriers are occupied with data symbols. occupied_carriers[0] identifies the carriers that are used for the first OFDM symbol, and so on. | ||
; Pilot Carriers | ; Pilot Carriers | ||
| Line 23: | Line 23: | ||
; Pilot Symbols | ; Pilot Symbols | ||
: | : A vector of vectors indicating the pilot symbols. | ||
; Sync Word 1 | ; Sync Word 1 | ||
| Line 32: | Line 32: | ||
; Header Modulation | ; Header Modulation | ||
: | : It has two options: | ||
:* BPSK (Binary Phase Shift Keying) | |||
:* QPSK (Quadrature Phase Shift Keying) | |||
; Payload Modulation | ; Payload Modulation | ||
: | : It has three options: | ||
:* BPSK (Binary Phase Shift Keying) | |||
:* QPSK (Quadrature Phase Shift Keying) | |||
:* 8-PSK (Eight Phase Shift Keying) | |||
; Scramble Bits | ; Scramble Bits | ||
| Line 52: | Line 57: | ||
; Python file | ; Python file | ||
: [https://github.com/gnuradio/gnuradio/blob/ | : [https://github.com/gnuradio/gnuradio/blob/main/gr-digital/python/digital/ofdm_txrx.py ofdm_txrx.py] | ||
; Block definition | ; Block definition | ||
: [https://github.com/gnuradio/gnuradio/blob/ | : [https://github.com/gnuradio/gnuradio/blob/main/gr-digital/grc/digital_ofdm_rx.block.yml digital_ofdm_rx.block.yml] | ||
Latest revision as of 13:23, 1 June 2022
Hierarchical block for OFDM demodulation.
The input is a complex baseband signal (e.g. from a UHD source). The detected packets are output as a stream of packed bits on the output.
Parameters
- FFT Length
- The length of FFT (integer).
- Cyclic Prefix Length
- The length of cyclic prefix in total samples (integer).
- Packet Length Tag Key
- The name of the tag giving packet length at the input.
- Occupied Carriers
- A vector of vectors describing which OFDM carriers are occupied with data symbols. occupied_carriers[0] identifies the carriers that are used for the first OFDM symbol, and so on.
- Pilot Carriers
- A vector of vectors describing which OFDM carriers are occupied with pilot symbols.
- Pilot Symbols
- A vector of vectors indicating the pilot symbols.
- Sync Word 1
- The first sync preamble symbol. This has to be with zeros on alternating carriers. Used for fine and coarse frequency offset and timing estimation.
- Sync Word 2
- The second sync preamble symbol. This has to be filled entirely. Also used for coarse frequency offset and channel estimation.
- Header Modulation
- It has two options:
- BPSK (Binary Phase Shift Keying)
- QPSK (Quadrature Phase Shift Keying)
- Payload Modulation
- It has three options:
- BPSK (Binary Phase Shift Keying)
- QPSK (Quadrature Phase Shift Keying)
- 8-PSK (Eight Phase Shift Keying)
- Scramble Bits
- Activates the scramblers (set this to True unless debugging)
- Log Debug Info
- Write output into log files (Warning: creates lots of data!)
Example Flowgraph
This flowgraph can be found at https://github.com/gnuradio/gnuradio/blob/master/gr-digital/examples/ofdm/ofdm_loopback.grc
Source Files
- Python file
- ofdm_txrx.py
- Block definition
- digital_ofdm_rx.block.yml