Python Block Message Passing

The previous tutorial, Creating Your First Block, demonstrates how to create a Python block using the Embedded Python Block. The next tutorial, Low Pass Filter Example, demonstrates how to use filtering blocks in GNU Radio.

Message Overview

Messages are an asynchronous way to send information between blocks. Messages are good at conveying control data, maintaining a consistent state across blocks and providing some forms of non-data feedback to blocks in a flowgraph.

Messages have a couple unique properties:

• There is no sample-clock based guarantee when messages will arrive
• Messages are not associated with a specific sample like a tag
• Message input and output ports do not have to be connected in GRC
• Message ports use the Polymorphic Type (PMT)

Message ports are denoted by a grey color and their connections are distinguished by dashed lines:

More information on message passing and PMTs can be found here: Message Passing

Flowgraph Overview

The following flowgraph will demonstrate how to:

• Add message sending and receiving ports to Python blocks
• Transmit messages
• Receive and handle messages
• Adapt block behavior in the work() function based on a received messages

Two custom Embedded Python Blocks will be created to:

• Select, or multiplex, one of two input signals based on a receive message
• Count the number of samples and send a message to the multiplexing block to switch inputs

This tutorial assumes you have already created at least one Embedded Python Block. If not, please complete the tutorial Creating Your First Block before moving on.

Start by adding the following blocks to the flowgraph and connecting them:

• Noise Source
• Signal Source
• Two Python Block
• Throttle
• QT GUI Time Sink
• Message Debug

Multiplexer: Defining Signal Input Ports

Double-click the first Embedded Python Block and open the source in the editor:

The example_param is not needed, so remove the variable example_param from the __init()__function:

def __init__(self):  # only default arguments here

and delete the line:

self.example_param = example_param

Change the name of the block to Multiplexer:

name='Multiplexer',

Add a second input to the block:

in_sig=[np.complex64, np.complex64],

Save the code (CTRL+S) and return back to GRC. The name of the block will have changed and the block will now have two inputs. Connect the Noise Source and Signal Source to the two inputs:

Multiplexer Python Block: Adding Message Input

Return to the code editor. A input message port needs to be added. Create a variable to name the port,

self.selectPortName = 'selectPort'

and then add a line to create, or register, the input port:

self.message_port_register_in(pmt.intern(self.selectPortName))

and finally, add a line to connect the input port with a message handler.

self.set_msg_handler(pmt.intern(self.selectPortName), self.handle_msg)

Save the code (CTRL+S). Notice that syntax errors are listed in the properties of the Embedded Python Block:

This error says that the pmt library needs to be imported. Return to the code editor and add the proper import statement:

import pmt

Multiplexer: Adding Message Handler

The message handler function now has to be defined. A message handler is the function which is called when a message is received. This message handler will switch between the two input ports based on the received message. The received

PMT

describe basic PMT types

link against other PMT pages

Creating a Message Output Port

• saving code 'compiles' the python and error messages are displayed the EPB window

• message ports do not have to be connected like stream/vector ports

The next tutorial, Low Pass Filter Example, demonstrates how to use filtering blocks in GNU Radio.