Talk:InstallingGR

DRAFT revisions to "To install system wide"

To install system wide

For this example, we will start in the home directory; you can, of course, use any directory you wish and the results will be the same.

• cd
• git clone --recursive https://github.com/gnuradio/gnuradio.git
• cd gnuradio
• git checkout maint-3.8 # change maint-3.8 if you want to use a different version; see releases
• mkdir build
• cd build
• Note: Use -DCMAKE_INSTALL_PREFIX=XXX in the following cmake command to install GNU Radio into the PREFIX XXX; if not specified, then the PREFIX is /usr/local.
  
• cmake -DCMAKE_BUILD_TYPE=Release -DPYTHON_EXECUTABLE=/usr/bin/python3 ../ # see other options in Common cmake flags.
• Note: If your computer's CPU has multiple cores, you can use the -j# option for make in the following command to speed compilation
  e.g. make -j3; specify one less than the maximum number of CPU cores so the system does not appear to 'freeze'.
  
• make
• make test
• sudo make install

If you're running Linux, then always remember to do the following command after installing any library:

• sudo ldconfig

Go to Setting PYTHONPATH to set your PYTHONPATH and LD_LIBRARY_PATH. After setting these environment variables, you might need to redo this last command for the Linux dynamic library loader to find the just-installed GNU Radio libraries.