Acts as a microphone input. See Audio Sink for a block that outputs to an audio device such as a speaker.
Not all sampling rates will be supported by your hardware. The audio source can have multiple outputs depending upon your hardware. For example, set the outputs to 2 for stereo audio.
To set the Audio sampling rate, click the drop-down menu to see popular rates. Note: not all sampling rates will be supported by your hardware. For typical applications, this should be set to 48kHz.
Leave the device name blank to choose the default audio device.
On OSX, go into the System Preferences, click on "Sound", and then the "Input" tab. The listings under "Name" contain the exact device names currently available; if a new audio source is attached to the computer then a new name will appear -- for example "Line In" for some Macs. Since most such device names contain spaces, make sure to put quotes around the name argument, for example:
spectrum_inversion.py -I "MacBook Pro Microphone"
On Linux, typical choices include:
For Linux ALSA users with audio trouble, follow this procedure:
- from a terminal window enter:
- find the entry such as:
hw:CARD=Device,DEV=0 USB Audio Device, USB Audio Direct hardware device without any conversions
from the list which matches your device.
- use the first line of that entry (e.g. "hw:CARD=Device,DEV=0") as the device name (without the quotes).
OK to Block
On by default, which should be used when this sink is not throttled by any other block.
This flowgraph shows the Audio Source block feeding a radioteletype (RTTY) decoder.