Designing Filter Taps

From GNU Radio
Revision as of 15:25, 11 January 2022 by Mattcarrick (talk | contribs)
Jump to navigation Jump to search

This tutorial will demonstrate how to create a list of filter taps and apply them within a low pass filtering block. This tutorial makes use of the flowgraph developed in the previous tutorial, Low Pass Filter Example.


Creating the Flowgraph

Begin with the flowgraph from Low Pass Filter Example, but replace the Low Pass Filter with the Frequency Xlating Filter and drag in the Low-Pass Filter Taps block:


FlowgraphFrequencyXlatingFilterStart.png


The Low-Pass Filter Taps block will design a set of filter taps that can be applied to filtering blocks. Filter taps may also be referred to as weights or coefficients. The response and performance of the filter is dependent on the parameters entered by the user. Double-click the Low-Pass Filter Taps block to open the properties. Edit the properties:

  • Id: lowPassFilterTaps
  • Cutoff Freq (Hz): samp_rate/4
  • Transition Width (Hz): samp_rate/8

File:LowPassFilterProperties.png


  • the taps are in a list
  • variables can be more than just a scalar, they can be a python data object