Draft-AN-445: Difference between revisions

From GNU Radio
Jump to navigation Jump to search
Line 78: Line 78:
==Building and installing UHD from source code==
==Building and installing UHD from source code==


UHD is open-source, and is hosted on GitHub. You can browse the code online at the link below, which points to version 3.14.0.0, which is the the latest release at the time of this writing.
UHD is open-source, and is hosted on GitHub. You can browse the code online at the link below.


* [https://github.com/EttusResearch/uhd/tree/v3.14.0.0 UHD repository on GitHub]
* [https://github.com/EttusResearch/uhd UHD repository on GitHub]


There are several good reasons to build GNU Radio from source code, especially for doing development and prototyping. It it enables an easy way to customize the location of the installation, and to install multiple UHD versions in parallel, and switch between them. It also provides much more flexibility in upgrading and downgrading versions, and allows the user to modify the code and create customized versions, which could possibly include a patch or other bug-fix.
If you want to use GNU Radio with a USRP, install the UHD package from source using the following instructions. UHD sits at the same level as GNU Radio as an independent driver, which gr-uhd references. So if you want gr-uhd enabled, you <b>FIRST</b> must clone and install UHD.


To build UHD from source code, clone the GitHub repository, check out a branch or tagged release of the repository, and build and install. Please follow the steps below. Make sure that no USRP device is connected to the system at this point.
For this example, we will start in the home directory to parallel the steps for installing GNU Radio from source.


First, make a folder to hold the repository.
<pre>cd ~/</pre>


    cd $HOME
Clone the code into your home directory:
    mkdir workarea
    cd workarea


Next, clone the repository and change into the cloned directory.
<pre>
git clone https://github.com/EttusResearch/uhd.git
cd ~/uhd
</pre>


    git clone <nowiki>https://github.com/EttusResearch/uhd</nowiki>
<b>Note:</b> In the following command, change <code>v4.4.0.0</code> to some other branch or tag if you want to build a different version.
    cd uhd
<pre>
 
git checkout v4.4.0.0
Next, checkout the desired UHD version. You can get a full listing of tagged releases by running the command:
</pre>
 
    git tag -l
 
''Example truncated output of <code>git tag -l</code>:''


<b>Note:</b> Unlike most GNU Radio build processes, UHD builds under the <code>host</code> directory.
<pre>
<pre>
$ git tag -l
cd host
...
mkdir build
release_003_009_004
cd build
release_003_009_005
release_003_010_000_000
...
</pre>
</pre>


'''Note''': As of UHD Version 3.10.0.0, the versioning scheme has changed to be a quadruplet format. Each element and version will follow the format of: '''Major.API.ABI.Patch'''. Additional details on this versioning change can be found [https://files.ettus.com/manual/page_semver.html here].  
<b>Note:</b> In the following command, we will use <code>-DCMAKE_INSTALL_PREFIX=/usr/local</code> to install UHD into the same prefix as GNU Radio.


After identifying the version and corresponding release tag you need, check it out:
    cmake -DCMAKE_INSTALL_PREFIX=/usr/local ../


    # Example: For UHD 3.9.5:
<b>Note:</b> In the following command, if your computer's CPU has multiple cores, you can use the argument <code>-j#</code> to speed compilation; <br> e.g., <code>make -j3</code> will use 3 threads in the build. Specify at most one less than the number of CPU cores so the system does not appear to 'freeze' during the build. If not specified, then a single thread is used for the build.<br>
    git checkout release_003_009_005


    # Example: For UHD 3.14.0.0
<pre>
    git checkout v3.14.0.0
make -j3
 
make test
Next, create a build folder within the repository.
sudo make install
 
</pre>
    cd host
    mkdir build
    cd build
 
Next, invoke CMake.
 
    cmake ..
 
'''Note''': if the shell <code>PATH</code> is set such that <code>/bin</code> comes before <code>/usr/bin</code>, then this step is likely to fail because cmake will set the <code>FIND_ROOT_PATH</code> to <code>/</code> and this setting will fail as a prefix for Boost headers or libraries. The cmake output will include messages such as
 
    --  Boost include directories: /include
    --  Boost library directories: /lib/x86_64-linux-gnu
 
and
 
    CMake Error in lib/CMakeLists.txt:
      Imported target "Boost::chrono" includes non-existent path
        "/include"
      in its INTERFACE_INCLUDE_DIRECTORIES.  Possible reasons include:
      * The path was deleted, renamed, or moved to another location.
      * An install or uninstall procedure did not complete successfully.
      * The installation package was faulty and references files it does not provide.
 
One of the following 3 options should fix this situation:
 
      1. <code>/usr/bin/cmake ..</code>
      2. <code>PATH=/usr/bin:$PATH cmake ..</code>
      3. <code>cmake -DCMAKE_FIND_ROOT_PATH=/usr ..</code>
 
Once the cmake command succeeds without errors, build UHD.
 
    make
 
Next, you can optionally run some basic tests to verify that the build process completed properly.
 
    make test
 
Next, install UHD, using the default install prefix, which will install UHD under the /usr/local/lib folder. You need to run this as root due to the permissions on that folder.
 
    sudo make install
 
Next, update the system's shared library cache.
 
    sudo ldconfig


Finally, make sure that the <code>LD_LIBRARY_PATH</code> environment variable is defined and includes the folder under which UHD was installed. Most commonly, you can add the line below to the end of your <code>$HOME/.bashrc</code> file:
Finally, make sure that the <code>LD_LIBRARY_PATH</code> environment variable is defined and includes the folder under which UHD was installed. Most commonly, you can add the line below to the end of your <code>$HOME/.bashrc</code> file:


     export LD_LIBRARY_PATH=/usr/local/lib
     export LD_LIBRARY_PATH=/usr/local/lib:$LD_LIBRARY_PATH
 
On Fedora 22/23/24/25 you will need to set the <code>LD_LIBRARY_PATH</code> to <code>/usr/local/lib64</code>.
 
    export LD_LIBRARY_PATH=/usr/local/lib64
 
If the <code>LD_LIBRARY_PATH</code> environment variable is already defined with other folders in your <code>$HOME/.bashrc</code> file, then add the line below to the end of your <code>$HOME/.bashrc</code> file to preserve the current settings.
    export LD_LIBRARY_PATH=$LD_LIBRARY_PATH:/usr/local/lib
 
For Fedora 21/22/23/24/25
 
    export LD_LIBRARY_PATH=$LD_LIBRARY_PATH:/usr/local/lib64


For this change to take effect, you will need to close the current terminal window, and open a new terminal.
For this change to take effect, you will need to close the current terminal window, and open a new terminal.
Line 190: Line 128:


<pre>
<pre>
linux; GNU C++ version 4.8.4; Boost_105400; UHD_003.010.000.HEAD-0-g6e1ac3fc
[INFO] [UHD] linux; GNU C++ version 12.2.0; Boost_107400; UHD_4.4.0.HEAD-0-g5fac246b
 
No UHD Devices Found
No UHD Devices Found
</pre>
</pre>

Revision as of 13:03, 3 April 2023

Application Note Number

AN-445

Abstract

This Application Note provides a comprehensive guide for building and installing the open-source toolchain for the USRP (UHD and GNU Radio) from source code on a Linux platform. The Ubuntu distribution is specifically discussed.

UHD on Linux

UHD is fully supported on Linux, using the GCC compiler, and should work on most major Linux distributions.

Devices

This document applies only to the USRP X300, X310, B200, B210, B200mini, N200, and N210 devices. The E310 and E312 devices are embedded devices which are fundamentally different from the other non-embedded devices. They are not addressed in this document.

Install Linux

If you already have a recent version of Linux installed, then you may be able to skip this section. If you are starting from scratch, or simply want to start with a new installation of Linux, then please follow the instructions and recommendations in this section.

We suggest that you use either Ubuntu 22.04, Ubuntu 20.04, or Debian Bullseye with a 64-bit architecture. There are several variants of Ubuntu, such as Xubuntu, Lubuntu, Kubuntu, Linux Mint, all of which should work. For the purposes of this document, these variants can be considered equivalent.

Download and install Ubuntu or Debian from the links below. Download the appropriate ISO image, and write it to a USB flash drive. Be sure to verify that the ISO file was not corrupted during the download process by checking the MD5 and/or SHA1 hash.

There are many tools for writing an ISO image to a USB flash drive. On most Ubuntu systems, there is the Startup Disk Creator utility. For other Linux OSs, MacOS, or Windows you can use Balena Etcher, UNetbootin, or many others. See 6 Best Bootable USB Creators for Linux for example.

Be sure to use a USB flash drive with at least 8 GB capacity, and use a USB 3.0 flash drive, not a USB 2.0 flash drive. If you use a slower USB 2.0 flash drive, then the install process will take significantly longer.

Update and Install dependencies

Before building UHD and GNU Radio, you need to make sure that all the dependencies are installed.

The following commands will install all the required dependencies. Before running them, you should ensure that the "Main" and "Universe" repositories are enabled in "Software Sources".

Next, on a terminal screen, run:

   sudo apt-get update

Once the system has been updated, then install the required dependencies below.

Focal Fossa (20.04) through Kinetic Kudu (22.10)

GNU Radio version 3.8.x with Python 3 support:

sudo apt install git cmake g++ libboost-all-dev libgmp-dev swig python3-numpy \
python3-mako python3-sphinx python3-lxml doxygen libfftw3-dev \
libsdl1.2-dev libgsl-dev libqwt-qt5-dev libqt5opengl5-dev python3-pyqt5 \
liblog4cpp5-dev libzmq3-dev python3-yaml python3-click python3-click-plugins \
python3-zmq python3-scipy python3-gi python3-gi-cairo gir1.2-gtk-3.0 \
libcodec2-dev libgsm1-dev

GNU Radio version 3.9.x in addition to above requires:

sudo apt install pybind11-dev python3-matplotlib libsndfile1-dev \
python3-pip libsoapysdr-dev soapysdr-tools

pip install pygccxml
pip install pyqtgraph

GNU Radio version 3.10.x and the 'main' branch in addition to above require:

sudo apt install libiio-dev libad9361-dev libspdlog-dev python3-packaging python3-jsonschema

If the installation of the dependencies completes without any errors, then you can proceed to build and install UHD and GNU Radio.

Building and installing UHD from source code

UHD is open-source, and is hosted on GitHub. You can browse the code online at the link below.

If you want to use GNU Radio with a USRP, install the UHD package from source using the following instructions. UHD sits at the same level as GNU Radio as an independent driver, which gr-uhd references. So if you want gr-uhd enabled, you FIRST must clone and install UHD.

For this example, we will start in the home directory to parallel the steps for installing GNU Radio from source.

cd ~/

Clone the code into your home directory:

git clone https://github.com/EttusResearch/uhd.git
cd ~/uhd

Note: In the following command, change v4.4.0.0 to some other branch or tag if you want to build a different version.

git checkout v4.4.0.0

Note: Unlike most GNU Radio build processes, UHD builds under the host directory.

cd host
mkdir build
cd build

Note: In the following command, we will use -DCMAKE_INSTALL_PREFIX=/usr/local to install UHD into the same prefix as GNU Radio.

   cmake -DCMAKE_INSTALL_PREFIX=/usr/local ../

Note: In the following command, if your computer's CPU has multiple cores, you can use the argument -j# to speed compilation;
e.g., make -j3 will use 3 threads in the build. Specify at most one less than the number of CPU cores so the system does not appear to 'freeze' during the build. If not specified, then a single thread is used for the build.

make -j3
make test
sudo make install

Finally, make sure that the LD_LIBRARY_PATH environment variable is defined and includes the folder under which UHD was installed. Most commonly, you can add the line below to the end of your $HOME/.bashrc file:

   export LD_LIBRARY_PATH=/usr/local/lib:$LD_LIBRARY_PATH

For this change to take effect, you will need to close the current terminal window, and open a new terminal.

At this point, UHD should be installed and ready to use. You can quickly test this, with no USRP device attached, by running uhd_find_devices. You should see something similar to the following.

[INFO] [UHD] linux; GNU C++ version 12.2.0; Boost_107400; UHD_4.4.0.HEAD-0-g5fac246b
No UHD Devices Found

Downloading the UHD FPGA Images

You can now download the UHD FPGA Images for this installation. This can be done by running the command uhd_images_downloader.

   $ sudo uhd_images_downloader

Note: Since this installation is being installed to a system level directory (e.g. /usr/local), the uhd_images_downloader command requires sudo privileges.

Example ouput for UHD 3.13.3.0:

$ sudo uhd_images_downloader 
Images destination:      /usr/local/share/uhd/images
Downloading images from: http://files.ettus.com/binaries/images/uhd-images_003.010.003.000-release.zip
Downloading images to:   /tmp/tmpm46JDg/uhd-images_003.010.003.000-release.zip
57009 kB / 57009 kB (100%)

Images successfully installed to: /usr/local/share/uhd/images

Example output for UHD 3.13:

$ sudo uhd_images_downloader
[INFO] Images destination: /usr/local/share/uhd/images
[INFO] No inventory file found at /usr/local/share/uhd/images/inventory.json. Creating an empty one.
00006 kB / 00006 kB (100%) usrp1_b100_fw_default-g6bea23d.zip
19484 kB / 19484 kB (100%) x3xx_x310_fpga_default-g494ae8bb.zip
02757 kB / 02757 kB (100%) usrp2_n210_fpga_default-g6bea23d.zip
02109 kB / 02109 kB (100%) n230_n230_fpga_default-g494ae8bb.zip
00522 kB / 00522 kB (100%) usrp1_b100_fpga_default-g6bea23d.zip
00474 kB / 00474 kB (100%) b2xx_b200_fpga_default-g494ae8bb.zip
02415 kB / 02415 kB (100%) usrp2_n200_fpga_default-g6bea23d.zip
05920 kB / 05920 kB (100%) e3xx_e320_fpga_default-g494ae8bb.zip
15883 kB / 15883 kB (100%) n3xx_n310_fpga_default-g494ae8bb.zip
00506 kB / 00506 kB (100%) b2xx_b205mini_fpga_default-g494ae8bb.zip
18676 kB / 18676 kB (100%) x3xx_x300_fpga_default-g494ae8bb.zip
00017 kB / 00017 kB (100%) octoclock_octoclock_fw_default-g14000041.zip
04839 kB / 04839 kB (100%) usb_common_windrv_default-g14000041.zip
00007 kB / 00007 kB (100%) usrp2_usrp2_fw_default-g6bea23d.zip
00009 kB / 00009 kB (100%) usrp2_n200_fw_default-g6bea23d.zip
00450 kB / 00450 kB (100%) usrp2_usrp2_fpga_default-g6bea23d.zip
00142 kB / 00142 kB (100%) b2xx_common_fw_default-g3ff4186b.zip
00460 kB / 00460 kB (100%) b2xx_b200mini_fpga_default-g494ae8bb.zip
00319 kB / 00319 kB (100%) usrp1_usrp1_fpga_default-g6bea23d.zip
00009 kB / 00009 kB (100%) usrp2_n210_fw_default-g6bea23d.zip
11537 kB / 11537 kB (100%) n3xx_n300_fpga_default-g494ae8bb.zip
05349 kB / 05349 kB (100%) e3xx_e310_fpga_default-g494ae8bb.zip
00866 kB / 00866 kB (100%) b2xx_b210_fpga_default-g494ae8bb.zip
[INFO] Images download complete.

Building and installing GNU Radio from source code

As with UHD, GNU Radio is open-source and is hosted on GitHub. You can browse the code online at the link below, which points to version v3.7.13.4, which is the the latest release at the time of this writing.

Note: GNU Radio is currently transitioning from major branches of 3.7.x.x to 3.8.x.x. It is generally recommend at this time to use either the v3.7.13.4 or maint-3.7 branch of GNU Radio. The master branch includes many major changes such as converting to use Python 3 and may be unstable.


As with UHD, there are several good reasons to build GNU Radio from source code, especially for doing development and prototyping. It it enables an easy way to customize the location of the installation, and to install multiple GNU Radio versions in parallel, and switch between them. It also provides much more flexibility in upgrading and downgrading versions, and allows the user to modify the code and create customized versions, which could possibly include a patch or other bug-fix.

Similar to the process for UHD, to build GNU Radio from source code, clone the GitHub repository, check out a branch or tagged release of the repository, and build and install. Please follow the steps below. Make sure that no USRP device is connected to the system at this point.

First, make a folder to hold the repository.

   cd $HOME
   cd workarea

Next, clone the repository.

   git clone --recursive https://github.com/gnuradio/gnuradio

Next, go into the repository and check out the desired GNU Radio version.

   cd gnuradio

To checkout the v3.7.13.4 branch:

   git checkout v3.7.13.4

Or to checkout the maint-3.7 branch:

   git checkout maint-3.7

Next, update the submodules:

   git submodule update --init --recursive

Next, create a build folder within the repository, invoke CMake, and build GNU Radio:

   mkdir build
   cd build
   cmake ../
   make

Next, you can optionally run some basic tests to verify that the build process completed properly.

   make test

Next, install GNU Radio, using the default install prefix, which will install GNU Radio under the /usr/local/lib folder. You need to run this as root due to the permissions on that folder.

   sudo make install

Finally, update the system's shared library cache.

   sudo ldconfig

At this point, GNU Radio should be installed and ready to use. You can quickly test this, with no USRP device attached, by running the following quick tests.

   gnuradio-config-info --version
   gnuradio-config-info --prefix
   gnuradio-config-info --enabled-components

There is a simple flowgraph that you can run that does not require any USRP hardware. It's called the dialtone test, and it produces a PSTN dial tone on the computer's speakers. Running it verifies that all the libraries can be found, and that the GNU Radio run-time is working.

   python $HOME/workarea/gnuradio/gr-audio/examples/python/dial_tone.py

You can try launching the GNU Radio Companion (GRC) tool, a visual tool for building and running GNU Radio flowgraphs.

   gnuradio-companion

If "gnuradio-companion" does not start and complains about the PYTHONPATH environment variable, then you may have to set this in your $HOME/.bashrc file, as shown below.

   export PYTHONPATH=/usr/local/lib/python2.7/dist-packages

On Fedora 21/22/23/24, the PYTHONPATH environment variable will need to be set to:

   export PYTHONPATH=/usr/lib/python2.7/site-packages:/usr/local/lib64/python2.7/site-packages/

Configuring USB

On Linux, udev handles USB plug and unplug events. The following commands install a udev rule so that non-root users may access the device. This step is only necessary for devices that use USB to connect to the host computer, such as the B200, B210, and B200mini. This setting should take effect immediately and does not require a reboot or logout/login. Be sure that no USRP device is connected via USB when running these commands.

   cd $HOME/workarea/uhd/host/utils
   sudo cp uhd-usrp.rules /etc/udev/rules.d/
   sudo udevadm control --reload-rules
   sudo udevadm trigger

Configuring Ethernet

For USRP devices that use Ethernet to connect to the host computer, such as the N200, N210, X300, X310, set a static IP address for your system of 192.168.10.1, with a netmask of 255.255.255.0. The default IP address of the USRP is 192.168.10.2, with a netmask of 255.255.255.0. You should probably set the IP address using the graphical Network Manager. If you set the IP address from the command line with ifconfig, Network Manager will probably overwrite these settings.

Connect the USRP

The installation of UHD and GNU Radio should now be complete. At this point, connect the USRP to the host computer.

If the interface is Ethernet, then open a terminal window, and try to ping the USRP with "ping 192.168.10.2". The USRP should respond to the ping requests.

If the interface is USB, then open a terminal window, and run "lsusb". You should see the USRP listed on the USB bus with a VID of 2500 and PID of 0020, 0021, 0022, for B200, B210, B200mini, respectively.

Also try running "uhd_find_devices" and "uhd_usrp_probe".

Thread priority scheduling

When UHD spawns a new thread, it may try to boost the thread's scheduling priority. If setting the new priority fails, the UHD software prints a warning to the console, as shown below. This warning is harmless; it simply means that the thread will retain a normal or default scheduling priority.

UHD Warning:
    Unable to set the thread priority. Performance may be negatively affected.
    Please see the general application notes in the manual for instructions.
    EnvironmentError: OSError: error in pthread_setschedparam

To address this issue, non-privileged (non-root) users need to be given special permission to change the scheduling priority. This can be enabled by creating a group usrp, adding your user to it, and then appending the line @usrp - rtprio 99 to the file /etc/security/limits.conf.

   sudo groupadd usrp
   sudo usermod -aG usrp $USER

Then add the line below to end of the file /etc/security/limits.conf:

   @usrp - rtprio  99

You must log out and log back into the account for the settings to take effect. In most Linux distributions, a list of groups and group members can be found in the /etc/group file.

There is further documentation about this in the User Manual at the link below.