Difference between revisions of "GFSK Mod"

From GNU Radio
Jump to: navigation, search
(Add example flowgraph for GFSK Mod block)
(Make it clearer how to replicate the results on the flowgraph)
 
Line 31: Line 31:
  
 
When the flowgraph runs, we see that the red and blue signals are the same, meaning that the bit streams before and after the GFSK modulation and demodulation are the same.
 
When the flowgraph runs, we see that the red and blue signals are the same, meaning that the bit streams before and after the GFSK modulation and demodulation are the same.
 +
 +
In order to replicate the results shown below, make sure you do the following:
 +
# Make sure you have a vector of 9 bits in your vector source. For example, I used (0,0,0,1,1,1,0,1,1) in this example.
 +
# Make sure you turn off the unpack function in the GFSK Mod block. You will need to double click the block to bring up the Properties pop-up in order to turn it off. Turn it off. Then you will see "Unpack: Off" show up on the block after you close its Properties pop-up.
  
 
[[File:Gfsk_mod_and_demod_in_action.png|800px]]
 
[[File:Gfsk_mod_and_demod_in_action.png|800px]]
 
  
 
== Source Files ==
 
== Source Files ==

Latest revision as of 23:46, 23 August 2021

Hierarchical block for Gaussian Frequency Shift Key (GFSK) modulation.

The input is a byte stream (unsigned char) and the output is the complex modulated signal at baseband.

Parameters[edit]

Samples/Symbol
Samples per baud >= 2 (integer)
Sensitivity
Given to the Frequency Mod
BT
Gaussian filter bandwidth * symbol time (float)
Verbose
Print information about modulator?
Log
Print modulation data to files?
Unpack
Unpack input byte stream?

Example Flowgraph[edit]

The flowgraph below shows an example of the GFSK Mod and GFSK Demod blocks in action. We GFSK modulate 9-bit long bit stream '000111011', and then GFSK demodulate it. Then we compare the two bit streams to make sure that they are the same.

Gfsk mod and demod.png

When the flowgraph runs, we see that the red and blue signals are the same, meaning that the bit streams before and after the GFSK modulation and demodulation are the same.

In order to replicate the results shown below, make sure you do the following:

  1. Make sure you have a vector of 9 bits in your vector source. For example, I used (0,0,0,1,1,1,0,1,1) in this example.
  2. Make sure you turn off the unpack function in the GFSK Mod block. You will need to double click the block to bring up the Properties pop-up in order to turn it off. Turn it off. Then you will see "Unpack: Off" show up on the block after you close its Properties pop-up.

Gfsk mod and demod in action.png

Source Files[edit]

Python files
[1]
Block definition
[2]