GFSK Mod: Difference between revisions

From GNU Radio
Jump to navigation Jump to search
mNo edit summary
 
(13 intermediate revisions by one other user not shown)
Line 33: Line 33:


== Internal Structure ==
== Internal Structure ==
Chunks to Symbols (input: byte, output: float) --> Interpolating FIR Filter (Float to float(real taps)) --> Frequency Mod --> Multilpy const (I/O type:complex)
For GNU Radio 3.8:
 
Packed to unpacked (input:byte, output:byte) --> Chunks to Symbols (input: byte, output: float) --> Interpolating FIR Filter (Float to float(real taps)) --> Frequency Mod --> Multiply const (I/O type:complex)


== Example Flowgraph ==
== Example Flowgraph ==


The flowgraph below shows an example of the GFSK Mod and GFSK Demod blocks in action. We GFSK modulate 9-bit long bit stream '000111011', and then GFSK demodulate it. Then we compare the two bit streams to make sure that they are the same.
This flowgraph has been created in GNU Radio 3.8. It shows an example of the GFSK Mod and GFSK Demod blocks in action. We GFSK modulate a 9-bit long bit stream '000111011', and then GFSK demodulate it. The input to the GFSK Mod block is in packed format, whereas the output of GFSK Demod block is in unpacked format. We can use the Repack Bits/ Pack K Bits block to convert the output from GFSK Demod to packed format. Both of these options are shown in the following flowchart. All three bit streams are compared in the QT GUI Time Sink block to make sure that they are the same.


[[File:Gfsk_mod_and_demod.png|800px]]
[[File:GFSK Mod and Demod Example.PNG|1000px]]


When the flowgraph runs, we see that the red and blue signals are the same, meaning that the bit streams before and after the GFSK modulation and demodulation are the same.
When the flowgraph runs, we see that the red, blue and green signals are the same, meaning that the bit streams before and after the GFSK modulation and demodulation are the same.


In order to replicate the results shown below, make sure you do the following:
In order to replicate the results shown below, make sure you do the following:
# Make sure you have a vector of 9 bits in your vector source. For example, I used (0,0,0,1,1,1,0,1,1) in this example.
# Make sure you have a vector of 9 bits in your vector source. The vector in above example is (0,0,0,1,1,1,0,1,1).
# Make sure you turn off the unpack function in the GFSK Mod block. You will need to double click the block to bring up the Properties pop-up in order to turn it off. Turn it off. Then you will see "Unpack: Off" show up on the block after you close its Properties pop-up.
# Create a QT GUI Range block with Id = delay.
# For the Repack Bits block, set the "endianness" value to MSB.
# Match the input and output types of the blocks as shown in the above flowchart (purple = byte, blue = complex, orange = float)


[[File:Gfsk_mod_and_demod_in_action.png|800px]]
[[File:GFSK Mod and Demod Output.png|800px]]


== Source Files ==
== Source Files ==

Latest revision as of 17:34, 29 March 2022

Hierarchical block for Gaussian Frequency Shift Key (GFSK) modulation.

The input is a byte stream (unsigned char) and the output is the complex modulated signal at baseband.

Parameters

Samples/Symbol
Samples per baud >= 2 (integer)
Default value = 2
Sensitivity
Given to the Frequency Mod
Default value = 1.0
BT
Gaussian filter bandwidth * symbol time (float)
Default value = 0.35
Verbose
Prints the value of bits per symbol and BT
Default value = Off
Log
Prints the following modulation data to .dat files:
* Chunks to Symbol data is written to "nrz.dat"
* Output of Gaussian filter is written to "gaussian_filter.dat"
* Output of frequency modulator is written to "fmmod.dat"
Default value = Off
Unpack (depreciated in GNU Radio 3.8)
Unpack input byte stream?

Internal Structure

For GNU Radio 3.8:

Packed to unpacked (input:byte, output:byte) --> Chunks to Symbols (input: byte, output: float) --> Interpolating FIR Filter (Float to float(real taps)) --> Frequency Mod --> Multiply const (I/O type:complex)

Example Flowgraph

This flowgraph has been created in GNU Radio 3.8. It shows an example of the GFSK Mod and GFSK Demod blocks in action. We GFSK modulate a 9-bit long bit stream '000111011', and then GFSK demodulate it. The input to the GFSK Mod block is in packed format, whereas the output of GFSK Demod block is in unpacked format. We can use the Repack Bits/ Pack K Bits block to convert the output from GFSK Demod to packed format. Both of these options are shown in the following flowchart. All three bit streams are compared in the QT GUI Time Sink block to make sure that they are the same.

GFSK Mod and Demod Example.PNG

When the flowgraph runs, we see that the red, blue and green signals are the same, meaning that the bit streams before and after the GFSK modulation and demodulation are the same.

In order to replicate the results shown below, make sure you do the following:

  1. Make sure you have a vector of 9 bits in your vector source. The vector in above example is (0,0,0,1,1,1,0,1,1).
  2. Create a QT GUI Range block with Id = delay.
  3. For the Repack Bits block, set the "endianness" value to MSB.
  4. Match the input and output types of the blocks as shown in the above flowchart (purple = byte, blue = complex, orange = float)

GFSK Mod and Demod Output.png

Source Files

Python files
[1]
Block definition
[2]