Phase Shift: Difference between revisions

From GNU Radio
Jump to navigation Jump to search
(Removed "Stub" category)
(Added link to GRC file for the shown flowgraph.)
 
(4 intermediate revisions by the same user not shown)
Line 26: Line 26:


Gnu Radio blocks used for this demonstration: [[Signal Source]], [[Complex Conjugate]], [[QT GUI Time Sink]], [[QT GUI Range]], [[Variable]], [[Vector Source]], [[Multiply]], [[QT GUI Constellation Sink]]
Gnu Radio blocks used for this demonstration: [[Signal Source]], [[Complex Conjugate]], [[QT GUI Time Sink]], [[QT GUI Range]], [[Variable]], [[Vector Source]], [[Multiply]], [[QT GUI Constellation Sink]]
== GRC File ==
[[File:PhaseShiftDemo.grc]]


== Source Files ==
== Source Files ==


; C++ files
; C++ files
: [https://github.com/gnuradio/gnuradio TODO]
: [https://github.com/gnuradio/gnuradio/blob/main/gr-blocks/lib/peak_detector_impl.cc peak_detector_impl.cc]


; Header files
; Header files
: [https://github.com/gnuradio/gnuradio TODO]
: [https://github.com/gnuradio/gnuradio/blob/main/gr-blocks/lib/phase_shift_impl.h phase_shift_impl.h]


; Public header files
; Public header files
: [https://github.com/gnuradio/gnuradio TODO]
: [https://github.com/gnuradio/gnuradio/blob/main/gr-blocks/include/gnuradio/blocks/phase_shift.h phase_shift.h]


; Block definition
; Block definition

Latest revision as of 01:50, 13 April 2024

This block will phase shift the input signal by the specified phase by multiplying the input times a shift value:

gr_complex(cos(d_shift_in_radians),sin(d_shift_in_radians))

Notes:
If degrees are provided, the block automatically handles the conversion.

This block functions like a Multiply Constant, but with the constant set to ej·shift, i.e. the corresponding value on the complex unit circle.

Parameters

(R): Run-time adjustable

Phase Shift
default: '0.0'
Units
options: ['Radians', 'Degrees']

Example Flowgraph

Flowgraph demonstrating the Phase Shift block. This flowgraph will allow the user to change the phase of a complex sinusoid and see how that affects the time domain and constellation graphs.

This flowgraph demonstrates how the Phase Shift block will change the phase of a complex sinusoid. It also demonstrates how shifting the phase will change its appearance on a constellation diagram. It creates a complex sinusoid (the Signal Source block), runs the sinusoid through the Phase Shift block, then into a QT GUI Time Sink for display of the time domain of the signal. The phase within the Phase Shift block is controlled by a QT GUI Range block. The range block allows the phase to be adjustable between -360 to +360 degrees (-2 π to +2 π).

Along with that is a Complex Conjugate block that is used to show the phase in the QT GUI Constellation Sink. (NOTE: If the signal going into the constellation or Argand diagram is not at 0 Hz, or centered around 0 Hz, it will spin. This makes it impossible to see the actual phase.) By multiplying the phase-shifted sinusoid with its non-phase-shifted complex conjugate, we can see the phase shift as the range value is adjusted. Two Vector Source blocks create a more-visible cross bar showing the real and imaginary axes.

This is a display from the flowgraph above. This shows the time domain and constellation diagram of a 125 degree (3π/4 radians) phase shift.

Gnu Radio blocks used for this demonstration: Signal Source, Complex Conjugate, QT GUI Time Sink, QT GUI Range, Variable, Vector Source, Multiply, QT GUI Constellation Sink

GRC File

File:PhaseShiftDemo.grc

Source Files

C++ files
peak_detector_impl.cc
Header files
phase_shift_impl.h
Public header files
phase_shift.h
Block definition
blocks_phase_shift.block.yml