Python Block Message Passing

The previous tutorial, Creating Your First Block, demonstrates how to create a Python block using the Embedded Python Block. The next tutorial, Low Pass Filter Example, demonstrates how to use filtering blocks in GNU Radio.

Message Overview

Messages are an asynchronous way to send information between blocks. Messages are good at conveying control data, maintaining a consistent state across blocks and providing some forms of non-data feedback to blocks in a flowgraph.

Messages have a couple unique properties:

• There is no sample-clock based guarantee when messages will arrive
• Messages are not associated with a specific sample like a tag
• Message input and output ports do not have to be connected in GRC
• Message ports use the Polymorphic Type (PMT)

Message ports are denoted by a grey color and their connections are distinguished by dashed lines:

More information on message passing and PMTs can be found here: Message Passing

Starting the Message Passing Flowgraph

The following flowgraph will demonstrate how to:

• Add message sending and receiving ports to Python blocks
• Transmit messages
• Receive and handle messages
• Adapt block behavior in the work() function based on a received messages

Two custom Embedded Python Blocks will be created to:

• Select, or multiplex, one of two input signals based on a receive message
• Count the number of samples and send a message to the multiplexing block to switch inputs

Start by adding the following blocks to the flowgraph and connecting them:

• Noise Source
• Signal Source
• Two Python Block
• Throttle
• QT GUI Time Sink
• Message Debug

Creating a Multiplexer Python Block

This tutorial assumes you have already created at least one Embedded Python Block. If not, please complete the tutorial Creating Your First Block before moving on.

Double-click the first Embedded Python Block and open the source in the editor:

The example_param is not needed, so remove the variable example_param from the __init()__function:

def __init__(self):  # only default arguments here

and delete the line:

self.example_param = example_param

Change the name of the block to Multiplexer:

name='Multiplexer',

Add a second input to the block:

in_sig=[np.complex64, np.complex64],

Save the code (CTRL+S) and return back to GRC. The block will now have two inputs. Connect the Noise Source and Signal Source to the two inputs:

PMT

describe basic PMT types

link against other PMT pages

Creating a Message Output Port

• saving code 'compiles' the python and error messages are displayed the EPB window

• message ports do not have to be connected like stream/vector ports

The next tutorial, Low Pass Filter Example, demonstrates how to use filtering blocks in GNU Radio.