Python Block Message Passing

From GNU Radio
Jump to navigation Jump to search

Template:TutorialNavigation

The previous tutorial, Creating Your First Block, demonstrates how to create a Python block using the Embedded Python Block. The next tutorial, Low Pass Filter Example, demonstrates how to use filtering blocks in GNU Radio.

Message Overview

Messages are an asynchronous way to send information between blocks. Messages are good at conveying control data, maintaining a consistent state across blocks and providing some forms of non-data feedback to blocks in a flowgraph.

Messages have a couple unique properties:

  • There is no sample-clock based guarantee when messages will arrive
  • Messages are not associated with a specific sample like a tag
  • Message input and output ports do not have to be connected in GRC
  • Message ports use the Polymorphic Type (PMT)

Message ports are denoted by a grey color and their connections are distinguished by dashed lines:

MessageBlockExample.png

More information on message passing with PMTs can be found here: Message Passing

Flowgraph Overview

The following flowgraph will demonstrate how to:

  • Add message sending and receiving ports to Python blocks
  • Transmit messages
  • Receive and handle messages
  • Adapt block behavior in the work() function based on a received messages

Two custom Embedded Python Blocks will be created to:

  • Select, or multiplex, one of two input signals based on a receive message
  • Count the number of samples and send a message to the multiplexing block to switch inputs

This tutorial assumes you have already created at least one Embedded Python Block. If not, please complete the tutorial Creating Your First Block before moving on.

Start by adding the following blocks to the flowgraph and connecting them:

  • Noise Source
  • Signal Source
  • Python Block
  • Throttle
  • QT GUI Time Sink

StartingFlowgraphMessagePassing.png

Multiplexer: Defining Signal Input Ports

Double-click the first Embedded Python Block and open the source in the editor:

EditMultiplexerProperties.png


The example_param is not needed, so remove the variable example_param from the __init()__function:

def __init__(self):  # only default arguments here

and delete the line:

self.example_param = example_param

Change the name of the block to Multiplexer:

name='Multiplexer',

Add a second input to the block:

in_sig=[np.complex64, np.complex64],

Delete the multiplication by example_param:

output_items[0][:] = input_items[0]

AddSecondInputEmbeddedPythonBlock.png


Save the code (CTRL+S) and return back to GRC. The name of the block will have changed and the block will now have two inputs. Connect the Noise Source and Signal Source to the two inputs:

MultiplexerWithTwoInputs.png

Multiplexer: Defining Message Input Port

Return to the code editor. A input message port needs to be added. Create a variable to name the port,

self.selectPortName = 'selectPort'

and then add a line to create, or register, the input port:

self.message_port_register_in(pmt.intern(self.selectPortName))

and finally, add a line to connect the input port with a message handler.

self.set_msg_handler(pmt.intern(self.selectPortName), self.handle_msg)

AddMessageHandler.png


Save the code (CTRL+S). Notice that syntax errors are listed in the properties of the Embedded Python Block:

CodeEditorErrorExample.png


This error says that the pmt library needs to be imported. Return to the code editor and add the proper import statement:

import pmt

ImportPMT.png

Multiplexer: Creating Message Handler

The message handler function now has to be defined. A message handler is the function which is called when a message is received. This message handler will switch between the two input ports based on the received message. The received message will either be a Boolean True or False. Define a new variable under __init()__ which will be the input selector,

self.selector = True

Now define the handle_msg() function:

def handle_msg(self, msg):
    self.selector = pmt.to_bool(msg)

The function pmt.to_bool() takes the message PMT and then converts the data type into Python's Boolean data type. PMTs are used in message passing to abstract data types. For example, messages can be used to send and receive strings, floats, integers and even lists. More information about PMTs can be found on the Polymorphic Types (PMTs) wiki page.

AddMessageHandler.png

Multiplexer: Using a Message in work()

The external interface of the multiplexer is complete. Now the block needs to have the multiplexing operation added through modification of the work() function. Add the following code to the work() function:

if (self.selector):
    output_items[0][:] = input_items[0]
else:
    output_items[0][:] = input_items[1]

MultiplexerWorkFunction.png


The multiplexor block selects port 0 if self.selector = True and port 1 if self.selector = False. The default value of self.selector is defined in the __init()__ function.

Save the code (CTRL+S) and return to GRC. The Multiplexer block will now have a message port selectPort:

CompletedMultiplexerBlock.png


Run the flowgraph to make sure everything is correct before moving on. As mentioned in the introduction, a message port does not have to be connected for a flowgraph to run. Because the default value of self.selector is True, the multiplexer's work() function will select port 0 and send that to the output. The QT GUI Time Sink will display noise:

MultiplexerNoiseInput.png

Creating a Message Output Port

  • saving code 'compiles' the python and error messages are displayed the EPB window



  • message ports do not have to be connected like stream/vector ports






The next tutorial, Low Pass Filter Example, demonstrates how to use filtering blocks in GNU Radio.