QT GUI Frequency Sink

From GNU Radio
Jump to navigation Jump to search

A graphical sink to display multiple signals in frequency.

This is a QT-based graphical sink that takes a set of floating point streams and plots the PSD. Each signal is plotted with a different color, and functions can be used to change the label and color for a given input number.

The sink supports plotting streaming float data or messages. The message port is named "in". The two modes cannot be used simultaneously, and should be set to 0 when using the message mode. GRC handles this issue by providing the "Float Message" type that removes the streaming port(s).

Parameters

Type
options: [Complex, Float, Complex Message, Float Message]
Name
title for the plot
FFT Size
size of the FFT to compute and display. If using the PDU message port to plot samples, the length of each PDU must be a multiple of the FFT size.
Spectrum Width
options (if Float input): [Full, Half]
Window Type
options: [Blackman-harris, Hamming, Hann, Blackman, Rectangular, Kaiser, Flat-top]
default: window.WIN_BLACKMAN_hARRIS
Normalize Window Power
options: [Yes, No]
Center Frequency (Hz)
center frequency of signal (only used for x-axis labels)
Bandwidth (Hz)
bandwidth of signal (used to set x-axis labels)
default: samp_rate
Grid
options: [Yes, No]
Autoscale
options: [Yes, No]
Average
options: [None, Low, Medium, High]
Y min
default: -140
Y max
default: 10
Y label
default: "Relative Gain"
Y units
default: "dB"
Number of Inputs
default: 1
Update Period
default: 0.10
Show Msg Ports
options: [Yes, No]
GUI Hint
See GUI Hint

Messages

Inputs

'freq'
set the center frequency
'bw'
set the bandwidth

Outputs

'freq'
the frequency where the output plot was double-clicked

Example Flowgraph

Freq-sink-ex.png

Source Files

C++ files
TODO
Header files
TODO
Public header files
TODO
Block definition
TODO