Streams and Vectors

From GNU Radio
Revision as of 20:37, 6 January 2022 by Mattcarrick (talk | contribs)
Jump to navigation Jump to search

This tutorial will describe the difference between a Stream and a Vector. You can find the previous tutorial here: Converting Data Types

Streams

Streams in GNU Radio are what convey the information between blocks and are represented by the arrows connecting blocks in a flowgraph. A stream must have a data type, such as Float 32 or Byte. A stream carries 1 sample for each time instance and are used to represent and process serial data.

The Signal Source block produces a Complex Float 32 stream. The output of the block at each time instance contains 1 complex sample:

SignalSourceStreamExample.png


Vectors

Vectors carry multiple samples per time instance, representing data in parallel. By analogy, a stream represents a scalar at each time instance whereas a vector represents an array at each time instance.

GRC uses lighter colors to represent streams and darker colors to represent vector outputs:

StreamVectorDarkerColors.png


Streams and Vectors Flowgraph Example

The following example will describe how to convert a stream to a vector and back to a stream. Two complex sinusoid streams will be converted to a 2-element vector, displayed, and then converted back to their independent streams.

Add two Signal Source blocks to the workspace:

TwoSignalSourceBlocks.png


Edit the parameters of the second Signal Source to have a frequency of 100 and amplitude of 0.1 to distinguish it visually from the first Signal Source:

ChangeFrequencyAmplitudeSignalSource.png