Audio Source

Acts as a microphone input. See Audio Sink for a block that outputs to an audio device such as a speaker.

Not all sampling rates will be supported by your hardware. The audio source can have multiple outputs depending upon your hardware. For example, set the outputs to 2 for stereo audio.

Parameters

Sample Rate

To set the Audio sampling rate, click the drop-down menu to see popular rates. Note: not all sampling rates will be supported by your hardware. For typical applications, this should be set to 48kHz.

Device Name

Leave the device name blank to choose the default audio device.

OSX

On OSX, go into the System Preferences, click on "Sound", and then the "Input" tab. The listings under "Name" contain the exact device names currently available; if a new audio source is attached to the computer then a new name will appear -- for example "Line In" for some Macs. Since most such device names contain spaces, make sure to put quotes around the name argument, for example:

   spectrum_inversion.py -I "MacBook Pro Microphone"

Linux

On Linux, typical choices include:

• pulse
• hw:0,0
• plughw:0,0
• /dev/dsp

For Linux ALSA users with audio trouble, follow this procedure:

• from a terminal window enter:

arecord -L

• find the entry such as:

   hw:CARD=Device,DEV=0
       USB Audio Device, USB Audio
       Direct hardware device without any conversions

      from the list which matches your device.

• use the first line of that entry (e.g. "hw:CARD=Device,DEV=0") as the device name (without the quotes).

Windows

On Windows, go into the Settings, cllck on "System", click on "Sound", and then the "Input" tab. The listings under "Name" contain the exact device names currently available; if a new audio source is attached to the computer then a new name will appear. Since most of the device names contain spaces, make sure to put quotes around the name argument, for example:

   "Microphone (Realtek High Definition Audio)"

OK to Block

On by default, which should be used when this sink is not throttled by any other block.

Example Flowgraph

This flowgraph shows the Audio Source block feeding a radioteletype (RTTY) decoder.